400V, 1.2kW, volume 25m³ / h, 25L tank

includes: ball valve, flexible hose connector, flexible hose (25m), flexible hose collar, pipe cross coupling, pipe plug, pipe double connector, teflon sealing tape

Cone diameters: ⌀104 / ⌀154

also referenced under: OOMAVAPUCR101, CRM 57, CR 8900

Cone diameters: ⌀84 / ⌀129

also referenced under: OOMAVAPUCR102, CRM 58, CR 8910

Cone diameters: ⌀48.3 / ⌀88.9

also referenced under: OOMAVAPUCR103, CRM 59

with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000

Comprising : 1 blower, 120W, 1 electrical relay, housing, 2m electrical cable, pipe D 75mm/2m, 1 pipe collar D 75mm, 1 blowing nozzle, 1 nozzle holding bar L 880mm, 1 sheet metal collector, 1 flange D 100mm for aspirator connection

also referenced under: OOMADUSTAS01A, CRM 84.5

Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85

380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2

Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91

220V, 2.5kW
2800 tr/min
110x60x150cm, 140kg

- Horizontal motor with 75x200mm abrasive pad
- M16 thread and T22 abrasive pinecone at the top of the shaft
- Foot switch operation
- Predisposition for connection to a centralized suction system
- diameter 150mm on the side
- Suction mouth behind the adjustable pad

380V, 1.25kW / 1.7kW
with dust collector

380V, 1.27 - 1.7kW

also referenced under: OOMAMARPOL3500, CRM 89

- 100% Swiss made quality
- 60 years of expertise in making hot-air tools – brought together in the new SOLANO AT
- The sturdy, professional hot-air tool that weighs less than 1 kg/2.18 lbs
- Functional design: two-component handle grip and optimum center of gravity ensure ergonomic working
- Quick clean air filters
- Automatic carbon stop (collector protection) and heating element protection
Voltage V ~: 230
Power W: 2300
Temperature ° C: 500–650
Air quantity (20 ° C) l / min: 240
Dimensions (L × ∅) mm: 270 x 270 x 75 (45)
Weight: 750gr

- Closed-loop controlled temperature
- Open loop controlled air volume
- Intelligent «e-Drive» operating unit
- Ergonomic handling
- Modern design/ Swiss made
Power W: 1600
Voltage V~: 230
Temperature °C: 45 - 620
Air volume (20°C) l/min: 160 - 240
Size (L x ∅) mm: 335 × 90
Handle ∅ mm: 56
Weight kg: 1

The TRIAC ST from Leister is a handy heat gun, primarily used as a profiling tool for welding and processing plastic membranes. Additionally, it is used for professional welding, shrinking and molding various thermoplastics. The two-sided air filters of the TRIAC ST can be easily removed and cleaned. This ensures an optimal air supply and maximum performance. As a successor of the TRIAC S, the ST combines a new, highly robust engine with current technology and modern design in a handy heat gun.

Compared to the design of other heat guns, the proven bar-style heat gun enables welding above the head, on the floor and in narrow areas. The ergonomic, two-component handle and its optimized center of gravity provide an ideal grip, even for longer periods of use and under difficult conditions. When in use, the actively cooled, protective tube ensures continuous safety by protecting against burns. The carbon brake also protects the heat gun from overloading. The extensive range of accessories with over 80 attachment nozzles practically make this heat gun a universal device. The TRIAC ST is already the seventh generation of Leister’s revolutionary line of TRIAC hot air tools. Decades of experience packaged in a modern design, manufactured with Swiss quality: The TRIAC ST is a robust and reliable tool.

VOLTAGE: 100 - 230 V
FREQUENCY: 60 Hz; 50/60 Hz
POWER: 1500 - 1600 W
TEMPERATURE: 40 - 700 °C
AIR FLOW (20°C): 240 l/min
TEMPERATURE SETTING STEPLESS: Yes
STATIC PRESSURE: 3000 Pa
NOISE EMISSION LEVEL: 67 dB (A)
OUTDOOR USE: Yes
DISPLAY: No
ECO MODE: No
E-DRIVE: No
NOZZLE CONNECTION Ø: 31.5 mm / 1.25 in; M14
LENGTH: 338.0 mm
DEVICE DIAMETER: 90 mm
HANDLE DIAMETER: 56 mm
WEIGHT: 0.99 kg
PLUG: KR, 2 poles, 16A; CN, 2 poles, 10A; EU, 2 poles, 16A; JP, 3 poles, 20A; CEE yellow, 3 poles, 16A; JP, 2 poles, 15A; AU, 3 poles, 10A; UK, 3 poles, 13A; US, 2 poles, 15A, polarized; CH T11, 2 poles, 10A
POWER CABLE LENGTH: 3.0 m
CONFORMITY MARK: CE
SAFETY MARK: KCC; S+; UL
PROTECTION CLASS: II

also referenced under: OOMAOWELAIRT, CRM 1, 141.311

• 100% Swiss made quality
• Leister's smallest manual device
• Continuous electronic temperature control
• Continuous electronic adjustment of the air flow
• Quiet
• Integrated flexible foot
Voltage V ~: 230
Power W: 460
Temperature ° C: 40-600
Air flow (20 ° C) l / min: 40/110
Dimensions (L × ∅) mm: 235 x 70
Weight: 400gr

also referenced under: OOMAOWELHJ01, CRM 1.0, 100.688

230V/500W
High-end quality made in Switzerland

Welding mirror with Teflon coating and automatic temperature control. Suitable for indoor and outdoor use.

Diameter: 280mm
Weight: 3.0kg
Power consumption: 900 Watts / 230 Volts 50 Hz
Design: straight
Includes device stand.

also referenced under: OOMAOWELPR28, CRM 7, BARY A-2

Tough industrial soldering irons with Ersadur long−life soldering tips (30 times the working life of conventional copper soldering tips). Warm−up time 3 min. (for size 300, approx. 5 min.). Power cable 1.5 m rubber cable (PVC for size 30). With support stand (not size 30).
Powerful soldering iron for copper cables up to 6 mm2 cross section.
Soldering tip width: 5.3 mm
Heating power: 150 W
Soldering tip temperature after 3 minutes: 450 °C
suitable for copper cross sections up to: 6 mm2

also referenced under: OOMAOWELIE15, CRM 10, 0155JD

The most efficient oscillating machines, available in three power categories (SuperCut, MultiMaster, MultiTalent); new model with Starlock tool carrier (optimized power transmission for up to 35% faster working speed).
Almost unlimited applications (sawing, grinding, scraping, cutting, grating) thanks to the oscillating movement (low dust emission).
Electronic progressive adjustment of the rotation speed for optimal use.
Maximum quality and stability thanks to the metal gear case and the combined use of ball and needle bearings.
Optimal maneuverability thanks to the ergonomic design and the Softgrip coating, reduced weight.
Powerful MultiTool for rapid progress (for interior design and renovation) with more than 30 accessories for sawing in wood and metal, sanding, cutting tiles, etc.
Delivery:
Set of 30 accessories, 1 × suction device, 1 × plastic tool case.
Set of 30 accessories: 1 × E-Cut Long-Life saw blade - (10 mm), 2 × E-Cut Long-Life saw blades (35 mm), 2 × E-Cut Long-Life saw blades ( 65 mm), 1 × E-Cut Carbide Pro saw blade (32 mm), 1 × carbide saw blade (⌀ 75), 1 × carbide rasp (triangular), 1 × spatula, 1 × perforated backing pad , 1 × perforated sanding sheet each (grit 60, 80, 120, 180).
With 1 × ALG 80 rapid charger, 2 × Li-Ion batteries (18 V / 3 Ah).
1 “Akku” case with charger, 1 backing pad, 3 sanding sheets each (grain 60, 80, 120, 180), 1 fixed spatula, 1 HSS segment saw blade, 1 Long-Life E- saw blade Cut (65 mm), 1 E-Cut universal saw blade (44 mm).
Manufacturer no .: AFMM 18 QSL
Number of batteries included: 2
Battery type: Lithium-ion
Battery capacity: 3 A h
Battery voltage: 18V
Tool holders: StarlockPlus, Starlock
Number of oscillations: 11'000 min-¹ - 18'500 min-¹
Oscillation angle: 3.4 °
Angle approach of the support plate: 80 mm
Weight: 1.8 kg

Market-leading oscillating tools in three different performance classes (SuperCut, MultiMaster, MultiTalent) in a new version with Starlock tool arbor (improved torque transmission of up to 35 % greater rate of progression of the work).
Virtually unlimited application possibilities (sawing, grinding, scraping, cutting, rasping) due to the oscillating mode of movement (low generation of dust).
Stepless electronic speed control for optimum working.
Very high quality and stability thanks to the metal gearbox and use of ball bearings and needle bearings throughout.
Optimum handling due to ergonomic design with soft-grip inlays and low weight.
Supplied with:
1 toolbox set “QuickStart” containing:1 abrasive plate, 3 each abrasive discs (80, 120, 180 grit), 1 E-Cut universal saw blade (44 mm).
Packaging: Carrying case
Manufacturer's designation: MM 300 Plus Start
Power consumption: 250 W
Toolholder: StarlockPlus, Starlock
Speed of oscillation: 11,000 min-1 - 20,000 min-1
Amplitude (oscillation movement): 2 × 1.6 degrees
Weight: 1.4 kg
Cable length: 5 m

Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for container and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
TÜV-free
- Type-tested by an approved monitoring body
- Recurring container inspections also possible by a competent person
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 440/100 OF PRO, EMACAIRCO380, CRM 178

- Designed for demanding continuous use when oil-free and clean compressed air is required
- Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
- Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
- Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
- The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
- Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
- One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
- Two comfort safety quick couplings
- High-quality CONDOR pressure switch
- One pressure gauge each for tank and working pressure
- Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
- Flexible armored hose line with heat protection prevents vibration fractures
- Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
- One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
- Two separate locking systems for maximum working safety
- No whipping of the hose line during uncoupling
Convenient transport
- Transport back-friendly in upright position and without lifting
- Additional transport handle directly on the container
- Puncture-proof PU foam wheels
- Stable steering chassis with parking brake
Immediately ready for use
- Fully automatic on-off operation
- With all safety devices
- Completely ready for connection

also referenced under: AIRPROFI 220/50 OF PRO, CRM 178.3

- Oil-free piston compressor, therefore no oil change necessary and no oil in condensate
- Fully automatic on-turn-off mode
- Electric motor equipped with motor protection switch
- One pressure gauge for displaying the container and working pressure

also referenced under: MOBILBOY 221/24 OF E

Designed for Orthopedics workshops
Manual height adjustment, milling shaft horizontally and vertically
adjustable, continuous speed control, M.16 milling shaft thread, adapter from M.16

Dimension : Out Side W.50—D.50—H.40 cm
Power Supply 220 Volt 50 Hz
Power cord With CEE plug 3 × 16 A and CEE socket 3× 16 A
Sound intensity level 80 dB(A)
Electrical connection 220 V 50 Hz 1500 Watt
Motor RPM Variable rotation speed, min. 0 to max. 3000 RPM
Connecting cable 3x2,5 mm2 3 mt
Router shaft length and Type 500 mm 30 to 35 mm ( Conic 220 mm )
Suction head hose 100 mm plastic ,flexible
Scope of delivery Exhaust arm with suction hood (Ø 100 mm +hose )
Color Rall 7035 & 7045
Weight Net 42 Kg

The new IR1001 COMPACT is of course equipped with the innovative optical temperature sensor and a con- troller of the next generation. Same as the larger Infrared-ovens the two-line PID-Controller keeps the user constantly updated of the preset and actual temperature values. The preselect feature allows the user to store four temperature settings which can be easily called up by use of a single button. A signal light informs the user when the set temperature is reached, even if he is not standing right in front of the control panel.

Technical Data: IR1001 COMPACT
Type: IR1001 COMPACT - Infrared Oven for the O&P field, Bench-top design
Footprint: approx. 1m²
Dimensions: Outside: W 1270 mm - D 920 mm - H 455 mm / Inside: W 1000 mm - D 800 mm - H 140 mm
Tray: tray movable full size on ball bearing guides, easy to remove without tools for fast teflon replacement, effective heating area: W 950 x D 750 mm
Power supply: 400V / 50/60Hz / 3 Phase / (16 Amp. CEE) / total capacity 7,7 kW, (other voltages available)
Heating: 12 Infrared-Quartz-tubes with reflector, Stand-by switch
Temperature control: opto-electronic IR-measuring unit, Measuring of the material´s surface temperature!
Temperature control: PID-Controller, infinitely variable from 30°C to 250°C

Technical Specifications:

Product Type: Soldering Iron
Power Supply: Mains operation
Tip Width: 3.1 mm
Heating Power: 30 W
Tip Temperature after 3 minutes: 380 °C
Suitable for copper sections up to: 2.5 mm²
Weight without power cord: 80 g
Identification and Classification Numbers:

EAN / GTIN: 4003008047004
Manufacturer's Reference: 0330KD
Description:
This industrial soldering iron is designed for exceptional longevity, equipped with Ersadur long-life tips that last 30 times longer than standard copper soldering tips. It heats up in 3 minutes, features a 1.5 m rubber power cable (ref. 30 uses PVC), and comes with a detachable iron stand (not included with ref. 30). The Ersa soldering iron also includes a clip-on iron stand for convenient and safe use.