220V / 50Hz / 0,2 kW
Teflon coated as protection, range of regulation: 100-180°C
with stand and 1,40m cable

With roll-about tray, 220V-380V / 20kW / 50Hz, working height: 1800x1600x400mm
External dimensions: 2000x1700x500mm

Vacuum-press for manufacturing of insoles and foot-orthotics. Without vacuum pump

Type: Vacuum-press , Bench-top version for use with external vacuum-supply
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable (equipped with Soft-bladder)
Vacuum-Pump: none
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm
Weight 21 kgs

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

also referenced under: OOMAMARPOL3500A, OOMAMARPOL3500C CRM 90, CRM 90.1

Complete thermoforming device with filtration and regulation of vacuum supply.
Two working positions :
- horizontal tube for thermoforming by lay-up (ex : for spinal orthoses)
- vertical adaptator for thermoforming by stamping (ex : for sockets)

incl. mounting bar for workbench assembly

also referenced under: OOMAMARP3000C, CRM 92

also referenced under: OOMAMARP3000O, CRM 92.2

also referenced under: OOMAMARP3000N, CRM 92.1

∅11 to 17mm

Versatile application possibilities
Two-stage gear ratio
Tool holder MK 2
Safety electronics in 24 Volt version
EMC filter class C1
Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
Height-adjustable and large-dimensioned protective screen with microswitch
Accurate delivery through positionable scale rings on all handwheels
Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
Infinitely variable speed from 100 to 3,000 min-1
High concentricity measured by tapered roller bearing better than 0.015 mm in quill
Stable column with dovetail guide via wedge bars adjustable on all 3 axes
Game in the feed spindle adjustable and adjustable
Column laterally displaceable for extended application
Massive cross table with T-slots and coolant channel as well as adjustable end stops
Integrated longitudinal scale in the cross table
All travel paths can be read on scales
Clean milling pattern by individually clamped guides
Inexpensive and stable in value

also referenced under: OPTImill BF 16Vario

Uniformly heats thermoplastic sheet materials commonly used to form prosthetic and orthotic devices. Infinitely adjustable temperature. Heating surfaces are coated with air permeable Teflon sheeting.Two gas cylinders assist in lifting the cover and hold it open at a 45° angle.

Dimension : Out Side: W.125—D.110—H.90 cm
Dimension : Top cover Open: W.125—D.110—H.180 cm
Dimension : Heater Area: W.100—D.85 cm
Power Supply: 220 Volt 50 Hz
Power cord: With CEE plug 5 × 16 A and CEE socket 5 × 16
Heating Pipe: Type 12 pcs / 550 x 12 : 6.600 Watt
Temparature Control: Digital Control 250 °C Max. J Type
Process Completed: Sound and red warning lamp
Upper and Lower Surface: Teflon 0.25 mm
Color: Ral 7035 & 7045
Weight Net: 152 Kg
Boxed : Dimension and Total Weight: W.140 -D.120- H.120 cm 225 kg

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 380V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Blister-forming Set for BK and AK prostetic socket production. The set includes a Blister-forming tray with two plates (D=320mm and D=265mm) and a vacuum-table with fitting silicone-rings and assembly material.

incl. mounting bar for workbench assembly

also referenced under: OOMAOVENCR50O, CRM 43

1m x 10m

also referenced under: OOMAOVENTEFLON, CRM 55

EMACAIRCGU14

- Ideal for ambitious modellers and do-it-yourselfers
- Flywheels made of die-cast aluminum with special coating
- Aluminium cast iron worktable swiveling up to 45°
- Equipped with precise 3-rolls saw band guide above and below the table
- Aluminum longitudinal stop with quick clamping precisely adjustable with the aid of a magnifying glass and millimeter scale
- Two belt speeds adjustable

also referenced under: HBS 361-2, EMACBSAWBS

5m

PVC

with gauge and support type T
Adjustable pressure 0-8.5 bar
Max. Flow 1'134 l / min
Plastic bowl, manual drain

DURKOPP ADLER class 525i zigzag machines, lockstitch, have been designed with interchangeable control cams. They are specially made for the production of decorative stitches (outlines) on made-up clothes and ladies' underwear in textile materials. These machines can be used for sewing light and medium textiles and leathers.
230V / 50/60 Hz
Delivered with:
- Table 105,110 or 120cm south 55 or 60cm
- Fixed frame
- Electronic motor
- Oil
- Accessories

long. total 5m - long. work 4m
With rotating unions with bearing
at both ends, external thread. G 1/4 "
With metal crease protection

Dimensions WxDxH: 850 x 500 x 1140mm
Weight: 83,000kg
Max. stitch length: 5mm
Sewing speed: max. 300 stitches
Needle system: 332 L LG, 332 LG
Footprint: 1000 x 750mm
max. presser foot stroke: 12mm

for inserting eyelets, hooks, push buttons, etc. also for punching with thread adaptor (Daude) for upper puncher, radius=150mm
OHDWRIVETMAC

Compact unit to provide vacuum for two Lamination work-places (4 separate inlets) +
1 direct-connection for vacuum supply, with integr. vacuum-pump + Vacuum-tank / 6m³/h / -0,8bar
Type: Laminating device TLV6-II
Vacuum-Pump: 6 m3/h / oil- and maintenance-free / end-vacuum 200mbar
Inlet / connections: 4x 8mm, separately switchable, 1x DIN coupling for vacuum supply etc.
Filter: dust-filter, per inlet
Vacuum automatic: standard
Power supply: 230V / 50Hz
Dimensions: W 435 x D 390 x H 240 mm
Weight: 22 kgs