also referenced under: OOMAMARP3000D, CRM 93

also referenced under: OOMAMARP3000I, CRM 98

also referenced under: OOMAMARP3000H, CRM 97

Thick cotton pad with abrasive grain of normal corundum

For the final finishing of prosthetic components

For the final finishing of prosthetic components

For the final finishing of prosthetic components
1 piece silicone sanding cone 5/8", conical
1 piece silicone sanding cone 5/8", conical, narrow
1 piece silicone sanding cone 5/8", cylindrical round with grooves
1 piece silicone sanding cone 5/8", cylindrical round
1 piece silicone sanding cone 5/8", double cone
1 stand

also referenced under: OOMAMARP3000F, CRM 95

also referenced under: OOMAMARP3000J, CRM 99

made of premium steel, forged, hardened and sharpened, concave ground cutting edge, PVC blade guard, blade length 240mm, blade width 30mm, weight 400g
74-00711, 718H12

74-01204

The black blade ‑ Lutz® multisharp, premium hardened blades with ultra-sharp ground edges.
Extra-fine and ultra-sharp ground blade.
Blade length: 100 mm
Blade width: 18 mm
Blade thickness: 0.5 mm
Number of snap-off points: 8
Number of blades: 10

Mango de madera

Multimatized handle with grip zone optimized for torque and comfort
74-01212

ETOOFILEYRBL

for widening holes, shaping or planing concave surfaces, very ideal for turner work, yellow plastic handle, black hand rest (can be disassembled)
74-01755

ETOOFILEYSHB

for hardwood, softwood, vinyl, nylon, plaster, chalk, chipboard, linoleum, rubber, thermalite, fiberglass

ETOOFILEYSSB, 716Y1

ideal tool for file work, black metal body, sturdy yellow plastic handle
74-00888

With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
Set of 3 conical sheet and tube drills and 1 cutting compound No. 118160 in a case.
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
1x each taper sheet and tube drill: Size 3 -14; 8 − 20; 16 − 30.5

Countersink sets, in a case.
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 6; 8; 10; 11.5; 15; 19
Number of countersinks: 6
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

HSS, 19 pieces, D 1 to 10mm by step of 0.5mm

HSS, 25 pieces, D 1 to 13mm by step of 0.5mm

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 180 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm
ETOOPLIEDAC180

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 200 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.8 mm

Serrated jaws. Cutting edges additionally induction hardened (approx. 64 HRC); suitable even for piano wire.
Jaws bright finished, plastic coated handles.
Standard: DIN ISO 5746
Material: Chrome vanadium steel, drop forged.
overall length: 160 mm
Cutting capacity hard wire up to ⌀: 2 mm
Cutting capacity piano wire up to ⌀: 1.5 mm
Jaw characteristics: inner face serrated
Handle: plastic coated
Manufacturing process: Cutting edges induction hardened (approx. 64 HRC), pliers body drop forged
Material: Chrome vanadium steel
ETOOPLIEUN160EC
74-00871

Considerable cutting performance with little effort. Serrated jaws. Cutting edges additionally induction hardened (approx. 63 HRC); also suitable for piano wire.
Jaws chemically blacked, polished head, plastic coated handles.
overall length: 225 mm
Cutting capacity hard wire up to ⌀3mm
Cutting capacity piano wire up to ⌀2.5 mm

Box joint (= double guides). Designed to prevent fingers being trapped. Induction hardened. Notched serrated jaws, adjustable in stepped holes. Multi-position ratchet adjustment.
Red powder-coated, polished jaws and joint.
Standard: DIN ISO 8976
Material: Chrome vanadium steel, drop forged.
overall length: 250 mm
Hexagon across flats: 36 mm
Jaw capacity for pipes: 1.1/2 inch
ETOOPLIEMU25
74-00785

Technical characteristics
Radius of curvature (middle tube): 45; 50; 65; 100; 130; 150; 200mm
Maximum thickness: 5.5 mm
Max bending angle: 90 degree
For nominal pipe sizes: 3/8 – 2 inch

Heavy-duty hydraulic tube bender with closed hydraulic system and return spring for better piston control. Cast iron pads and shapes, powerful piston delivering a pressure of 450 bars. High quality piston seals prevent leakage and increase service life. Skates with bending angle indication. Safe bending of tubes thanks to closed flange. The special design of the lever ensures protection against overloads. Delivery in a resealable wooden box.

Use:
For bending galvanized and black steel tubes as well as gas tubes (3/8 inch − 2 inch). Max. bending angle 90°, tubes max. 5.5 mm thick (2 inch tubes). Easy actuation thanks to the long piston stroke with each pump. Universal use in mechanical engineering, for work on pipeline systems, locksmithing, etc.

Content:
1 form of each: Ref. 3/8; 1/2; 3/4; 1; 1.1/4; 1.1/2; 2
Skate 2 pc.
Hydraulic tube bender: 1 pc.
Wheels: 3 pcs.

This pneumatic jigsaw is the ideal tool for professionals seeking performance, precision, and ease of use. Designed for demanding applications, it offers exceptional power and innovative features, suitable for a variety of materials.

Key Features:
Outstanding Cutting Performance:

Cutting depth in wood: 85 mm
Cutting depth in plastic: 30 mm
Cutting depth in mild steel: 10 mm
Cutting depth in aluminum and non-ferrous metals: 15 mm
Power and Efficiency:

High cutting speed at 2,200 strokes/min.
Output power of 400 W for clean and precise cuts.
Optimized air consumption at 17.5 l/s under load.
Ergonomic and Practical Design:

Lever switch for easy control and intuitive use.
SDS system for quick, tool-free blade changes.
Secure guidance with a mushroom handle for precise and comfortable handling.
Lightweight at only 1.9 kg to reduce fatigue during prolonged use.
Compatibility and Durability:

Thread size: 1/4"-NPT.
Required inner hose diameter: 10 mm.
Compact dimensions for easy storage: 210 x 280 x 85 mm.

ETOOKEYSAM02

A powerful and ergonomic tool, this pneumatic riveter ensures fast and efficient riveting on steel, aluminum, and stainless steel. Its lightweight design (1.3 kg) and high-performance jaw system guarantee a firm and durable grip.

🔧 Features:
✔ Pulling force: 4,200 N | Stroke: 15 mm
✔ Operating pressure: 5 – 7 bar | Air consumption: 1 L/rivet
✔ Compatible with blind rivets:

All materials: Ø 3.2 mm
Steel/aluminum: Ø 4 mm
🔥 Benefits:
✔ Dual-use air system → Reduced air consumption
✔ Fast work cycle → Optimized productivity
✔ Removable nail collector → Clean and safe work
✔ Ergonomic and lightweight → Comfortable handling

📦 Included:
🔹 Mounting wrenches 12/14 and 14/17
🔹 Hydraulic oil bottle (100 ml)
🔹 Nosepieces: 17/18, 17/20, 17/22