The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 25×7 mm
Length without tang: 250 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 160 mm
Diameter: 2.9 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×2.0 mm

Swiss precision needle files satisfy the highest demands for accuracy of shape, precision cut, removal rate and tool life. Cut length = 1/2 file length. Manufactured from special steel for precision files with high wear resistance (65-66 HRC). Precisely determined shapes, special cut angle and large selection of different cuts. High metal removal rate.
Overall length: 200 mm
Cross section: 6.5×1.3 mm

The blanks are precision forged, ground and have an exact cut of even density and depth. After most careful tempering while hardening, these quality wood rasps/ files achieve the best performance and tool life.
Norm: DIN 7263
Cross section: 29×9 mm
Length without tang: 300 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 250 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
With helical cut; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form E
Length without tang: 250 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on 3 faces; square end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form A
Length without tang: 250 mm

Saw blade for wood and plastic of high-quality special steel with bright reinforced back. Fine teeth, hardened tips, set and sharpened, 35 mm depth of cut.
With fixed, varnished handle offset to the right.
TPI: 15
Blade length: 250 mm

Blade thickness: 0.4 mm
Blade length: 150 mm
TPI: 25

Small and handy, good cutting performance.
With adjustable natural varnished wooden handle. Can be clamped at any point on the frame. Frame solid nickel-plated steel square bar.
Supplied with: Including general-purpose saw blade for metal, aluminium, wood and plastic. Blade length 150 mm.
Blade length: 150 mm
Overall length: 310 mm

Execution:
Body in anodized aluminum, deburring cone in special hardened steel.
Use:
Professional interior and exterior deburring of stainless steel, steel, copper, plastic and aluminum pipes.
Technical data
For ⌀ tube: 8 mm - 35 mm
Use: Stainless steel; Steel; Copper; Aluminum
Material: Special hardened steel
Housing material: Anodized aluminum

With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
overall length: 160 mm
Jaw length: 41 mm

With short strong jaws (round). Smooth jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 140 mm
Jaw length: 28 mm

With long, slim jaws and flush fitting joint.
Pliers chrome-plated, plastic coated handles.
Standard: DIN ISO 5745
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Jaw length: 42 mm
overall length: 140 mm

With short strong jaws (flat). Serrated inside jaws.
Jaws chemically blacked, polished head, plastic coated handles.
Standard: DIN ISO 5745
Material: Special tool steel, drop-forged, and oil-hardened.
Type of jaws: inner face roughened
Jaw design: flat
Jaw length: 30 mm
overall length: 160 mm

Heavy-duty head with additionally induction hardened cutting edges (approx. 64 HRC). Laid-on joint. High cutting performance due to optimum leverage.
Jaws bright finished, plastic coated handles.
For all types of wire (long working life even with hard wire). Heavy duty for the most demanding applications.
Standard: DIN ISO 5749
Material: Chrome vanadium steel, drop-forged and oil-hardened.
Cutting capacity piano wire up to ⌀2,5 mm
Cutting capacity soft wire up to ⌀4,2mm
overall length: 200 mm
Cutting capacity hard wire up to ⌀3 mm

For connecting screwdriver bits to drive attachments or screwdrivers with a 1/4, 3/8 or 1/2 inch square drive.
With quick-change coupling; for electric screwdrivers.
Square drive: 1/4 inch
overall length: 30 mm
Hexagon drive: C 6.3 (1/4 inch)

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 10 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 8 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 6 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 5 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 4 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
Application:
For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Of PB Swiss Tools special steel combining maximum hardness with exceptional toughness.
Drive profile: Hexagon screwdriver
Hexagon: 3 mm
overall length: 50 mm
Bit hexagon shank: E6.3

Kraftform handle for easy transmission of the required torque. With Rapidaptor quick-change holder for 1/4 inch bits with C6.3 and E6.3 shank. Sizes 600 and 880 with pistol grip for transmission of higher torques.
The torque can be set using a torque analyser (No. 654300 − 654460) and a 7AF hexagon screwdriver (10AF for size 600) . The torque screwdrivers are factory-set to the most frequently used torque setting.
When the set torque is reached the screwdriver triggers, with clearly audible and perceptible signals. The triggering torque is unrestricted.
maximum torque: 120 cN·m
set torque: 0.3 N·m
Bit socket: D6.3 ; F6.3
Torque range:0.3 N·m - 1.2 N·m
Connection format: bitholder 1/4 tomme
Overall length L: 155 mm
Adjustable trigger value: pre-set

Comfortable multi-material cross handle made of plastic. Chrome-vanadium steel blade, chrome-plated.
Hexagonal: 6mm
Blade length: 350 mm
Total length: 382 mm

The slideable T-handle is fitted with an end-stop to ensure it does not slide out.
With swivel jointed head (torsion drive 50°, swing drive up to 90°). The swivel angle is secured by an integral spring.
Material: Chrome vanadium steel, chrome-plated.
Drive profile: Hexagon socket
Wrench length: 450 mm
Width across flats: 17 mm
Length of sliding handle: 200 mm

In plastic clip.
L-form shaft to DIN 911/DIN ISO 2936, chromium-vanadium steel, end faces squared and milled.
Content table use: 1 pc. each screwdriver Size 2; 2.5; 3; 4; 5; 6; 8

Special steel drive head ground, hardened and burnished; with fixed pins.
Application: For twin hole nuts.
Note: Pin ⌀ = pin nominal ⌀ - 0.1 mm; tolerance field h12.
Pin spacing adjustable: 7 mm - 40 mm
overall length: 115 mm

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

Sturdy design with chamfered arms, tool steel, forged and precision ground. Riveted through joint hinge. Hardened and ground points.

1 straight point; knurled metal handle.
overall length: 180 mm

Solid semicircular graduated arc with graduation 0 − 180°; reading 1°.
Scale plate non-glare chrome-plated. With clamping nut.

Carbide measuring surfaces finely lapped.
Measuring pin hardened and ground.
Blocking by lever.
With friction clutch and insulation.
With graduation of quality.
Metrology: Analogue / Packaging: Robust box / Standard: DIN 863 / ⌀ Spindle: 6.5 mm / Reading: 0.01 mm / Calibration: B1 / Measuring range: 0 mm - 25 mm / Micrometer scale: 1/50 mm / ⌀ micrometer drum: 18 mm

All faces and edges ground. Inspection test faces ground.
Application:
For accurate general workshop work.
Accuracy:
DIN 875 / 2 − angle tolerance e.g. for size 100×70 = 0.030mm.

Automatic blocking of the ribbon during stretching.
Rewinding the ribbon by pressing the button.
Mobile terminal hook.
Yellow tape measure, printed black / red, acrylic coating for better resistance to abrasion.
Case dimensions: 52x49x22mm
Ribbon length: 2m
Band width: 13mm

Pure black Chinese bristle, 90 % tops. Metal ferrule, 9. gauge, unpainted wooden handle.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of stainless spring steel strip.
Clean electrolytically applied black graduations and figures with a smooth surface. Easy to read. Rounded edges to prevent injuries.
Upper and lower edges both with 1 mm graduations.

Of special stainless clock spring steel with ground measuring edges. Wide version. Upper and lower edges both with mm graduations. Very easy to read due to matt surface and sharp graduation scale.
Graduations electrolytically etched. Matt non-reflective surface.

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

Made of flat-oval steel, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering.

The casting table has been designed to meet the needs of all kind of prothetic patients, including lower extremity prostheses, hip and knee disarticulation prostheses.
The geared system and the ergonomic design enable the technician to adjust the height appropriately allowing the patient to comfortably stand upright while the measurements are taken.