for children's elbow L = 27cm

also referenced under: OOMAMOULEC27, CRM 82

Sander with two telescopic booms on rubber contact rollers.
Power supply: 400 Volt
Belt: 50 x 2500 mm
Weight: 140 kg
Headphones mandatory (according to DIN EN 352)

400W / 1.27kW

also referenced under: OOMAMARPDB01, CRM 91

Effective delivery volume approx: 1000 l/min
Maximum Pressure: 10 bar
Pressure vessel capacity: 500 l
Air outlet: ¾ "
Length approx: 1980 mm
Width/depth approx: 700 mm
Height approx: 1630 mm
Weight approx: 307 kg
Absorbed power electric motor: 7.5 kW
Supply voltage: 400 V
Mains frequency: 50 Hz
Motor type: Electric
Sound pressure level Lp: 68 dB(A)

The casting table has been designed to meet the needs of all kind of prothetic patients, including lower extremity prostheses, hip and knee disarticulation prostheses.
The geared system and the ergonomic design enable the technician to adjust the height appropriately allowing the patient to comfortably stand upright while the measurements are taken.

with connection kit 121 W 312 and 2 enveloping tubes (adult 121 W 001.L + child medium 121 W 001.M), 220 Volts/750W, 0.85 to -0.1 mbar

also referenced under: OOMAVAPUCR10, CRM 56, CR 1000

surface satin finished, material thickness 1.5 mm, seamless welded bowl with diameter 450 x 500 x 150 mm, bowl and drain board with revolving channel, 1 1/2" centric waste hole punch, removable plaster basket with cover.

fixedly mounted on a trapezoidal steel plate,
for mounting on a workbench or the like,
multi-stage height adjustment of the milling axis,
powerful motor with 2 turning speeds,
electromagnetic motor brake,
removable axle guard
400V / 50Hz / 2,7-3,4 kW

230V/1100W/7.5A, 570-890 m3/h, dimensions 1200/600/H1'380mm

also referenced under: OOMADUSTAS01, CRM 107

Space requirements WxD: 1400 x 800 mm
Power requirements: 400 V / 50 Hz / 1,27 kW / 1,7 kW
Noise level: 75 dB(A)
Power cord length: 2 m
Weight: 134,000 kg
Calour: lichtgrau (RAL 7035)
Scope of delivery: with 1 Sanding belt (2500 x 50 mm), 1 round grinding plate, 2 m power cord with CEE plug
Sanding belt speed: 15/30 m/sec
Dimension upper part W x D x H: 1000 x 500 x 1622 mm
Description: left side: aluminium plane wheel 350 mm Ø, continuous, inclinable support table, folding down at the side for full use of the grinding surface, extraction connection piece 100 mm Ø to connect to a chip extraction system with a minimum air velocity of 20 m/s right side: belt tensioning arm with closed protection hood, extraction connection piece 100 mm Ø, belt length 2500 mm, belt width 50 mm with round plate, contact wheel, sanding belt

This treadmill has been designed using Tunturi’s years of experience in the field. The treadmill’s running track features excellent shock absorption, thus helps to prevent aching joints. Its strong motor ensures sturdy and stable running even at low speeds.

The Platinum Pro Experience
large running track equipped with good shock absorption
strong and silent 3HP AC motor with a maximum speed of 20 km/h
splendid robust design frame concept
straightforward and user-friendly console with TFT-LCD display
waxed belt and the reversible deck ensure very good durability and low maintenance
safe training thanks to the pulse-driven programs and the safety key

Technical Features
7" color TFT-LCD
26 programs: 1 manual, 10 preset, 10 users, 1 target HRC, 1 test, 3 T-Road
11 selectable languages
USB charger 5V DC 1A
shock absorbing: T-Flex
bottle holder
contact heart rate and telemetric HR receiver built-in
motor: 3,0 HP AC
power supply: 230V
speed: 0,8 - 20 km/h
elevation: 0 - 15%
running surface: 153 x 56 cm
running belt: Comfort 2,2 mm
running deck type: 25 mm
maximum user weight: 165 kg
dimensions: 213 x 144 x 89 cm
weight: 172 kg
transport wheels
Reha handlebar: option
option: heart rate chest belt
tablet support
apps: Kinemaps (not controlled)

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

400V, 1.2kW, volume 40m³ / h, 25L tank

380V / 2.2 - 3kW / 1400 - 2800 rpm

also referenced under: OOMAMARPLB25, CRM 84.2

for inserting the knee tube inside the concave cylindre

also referenced under: OOMAALIGMIM

V One knee is controlled by a microprocessor and sensors. In the auto-mode, the flexion resistances of the knee joint will be adjusted automatically depend on user's walking speed and gait patterns. In the manual-mode, manual set for the flexion resistances is also available.

Safety and intelligence
A new gravity sensor is integrated to estimate different walking speeds, and the knee prosthesis resistance can be changed for more natural gait and safety.

Walking resistances setting
The resistances of the knee joint for three walking conditions (slow, natural, fast walking) are set by the PC program in the auto-mode.

Four-bar mechanical design
The trajectory of the instance center of rotation (ICR) mimics anatomic pattern, which ensures stability in the stance phase and toe clearance in the swing phase.

Carbon frame
It makes knee lighter and more durable.

It is a bicycle ergometer for lower limb movement therapy
or higher. Dimensions: 52 x 76 ÷ 90 x 105 ÷ 125 h cm; Weight: 56 kg
Patient interface: 7 '' color touch screen
Movement therapy: active, assisted, passive
Resistance level Lower limbs: 20 levels, 2-20 N ∙ m
Upper members: 2 - 8 N / m
Passive standard motor speed: 60 RPM (Rotations per minute)
Motor speed for Parkinson's: 100 RPM on request
Maximum active pedaling speed: 100 RPM
Engines: 2 / alternative use
Power supply: Europe 220-240V ~ / 50-60Hz - 0.83A
USA, Canada 110-120V ~ / 50-60Hz - 1.6A
Medical device class: II a
Height adjustment: min 90 cm / max 109 cm
Depth adjustment of the ergometer arm: range of 12.5 cm in 6 steps
Screen adjustment: 0 - 90 °
Handle radius / Pedal radius: 2 different positions / 3 positions
Mode of use: wheelchair / other suitable chair
Easy transfer: 2 rubber coated wheels included
Spasm control function: 3 thresholds / reversal of rotation
Motivational therapy: Games / biofeedback
Personal data backup: personal data and settings
Software update / export of
data: with USB key, at home

The new Multistim HT VAC is an advanced and complete universal electrotherapy device made for professional users, with built-in vacuum module.
- Low frequency currents:
biphasic, Tens, diadynamic (50-100Hz – CP, LP, 50 Hz and 100 Hz interrupted), rectangular, triangular, exponential, galvanic, galvanic interrupted, ionophoresis, faradic (triangular, rectangular, neodyn), Trabert, ultra-reiz
- Medium frequency currents:
IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF stimulation, isodynamic, Kotz
- All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
- The versatile Windows CE operating system ensures possible upgrading.
- A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
- After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
- Free memories for entering customized protocols.
- 2 independent patient circuit
- max. intensity:
• low frequency currents: 76,5 mA (153 mAp)
• medium frequency currents: 127 mA (153 mAp)
- frequency from 2,5 to 20 kHz
- vacuum module:
• continuous or pulsed mode
• double output allowing bipolar or quadripolar application
• pressure: 0,6 bar
- color touchscreen 400x800 pixels
- power supply: 115-230 V~ 50/60 Hz
- consumed power: 80 VA
- dimensions: 40 x 30 x 23 cm
- safety class: class I type BF according to IEC 601-1
- Directive EEC 93/42: IIa

The new Multistim HT VAC is an advanced and complete universal electrotherapy device made for professional users, with built-in vacuum module.
Low frequency currents:
biphasic, Tens, diadynamic (50-100Hz – CP, LP, 50 Hz and 100 Hz interrupted), rectangular, triangular, exponential, galvanic, galvanic interrupted, ionophoresis, faradic (triangular, rectangular, neodyn), Trabert, ultra-reiz
Medium frequency currents:
IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF stimulation, isodynamic, Kotz
All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
The versatile Windows CE operating system ensures possible upgrading.
A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
Free memories for entering customized protocols.

Technical Features
2 independent patient circuit
max. intensity:
• low frequency currents: 76,5 mA (153 mAp)
• medium frequency currents: 127 mA (153 mAp)
frequency from 2,5 to 20 kHz
vacuum module:
• continuous or pulsed mode
• double output allowing bipolar or quadripolar application
• pressure: 0,6 bar
color touchscreen 400x800 pixels
power supply: 115-230 V~ 50/60 Hz
consumed power: 80 VA
dimensions: 40 x 30 x 23 cm
safety class: class I type BF according to IEC 601-1
Directive EEC 93/42: IIa

Microprocessor controlled unit for passive mobilisation of knee and hip - adjustable speed, force and work time - repetition at flexion and extension limit - built-in 24V alimentation
The Fisiotek 3000 has a programming console with cognitive display, clear images and easy to set parameters. The new aluminium structure also allow support of stout limbs.
Mobile programming keyboard, listing all the functions, for versatile use at the professional level and at home.
Technical Features
- range knee movement: -10° - 120°
- range hip movement: 7° - 115°
- speed: 0,8°/s - 3,5°/s
- force: 0 - 40 kg
- adjustable foot support
- warm up cycles via menu
- pause during flexion
- repetition at flexion and extension limit
- mains supply: 90/250V 50/60Hz
- safety class: class 1B standard EN 60601-2
- CE directive 93/42: class IIa
- weight: 9,5 kg

- Heavy design with high dead weight for maximum running smoothness
- Particularly quiet and pretorsionally stiff machine housing
- Cast flywheels with rubber coating and cleaning brush
- 3-roller precision saw band guide as standard at top and bottom
- Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
- Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
- Saw blade tension indicator
- Precise cutting height adjustment overover toothed rack with millimetre scale
- Self-braking motor

also referenced under: HBS 640 AS

MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter

380V, 2200W, 3000rpm
with dust collector

Sheet steel cabinet body with integrated door locking system, interior body with chemical resistant surface.
Shelving for 32 mm pitch shelves.
Ground retention tank (according to StawaR).
With exhaust air connection (NW 75).
With door locking system.
Lockable with a profile half-cylinder, can be integrated into a house lock. Not compatible with the Hoffmann locking system.
With 4 adjustment elements to compensate for slight unevenness in the floor.
2 doors
Correct storage of flammable hazardous products in work rooms.
Standard: DIN EN 14470-1, type test (tested in a fire chamber), 90 minutes fire resistance.
Delivery: Cabinet with 3 shelves, a perforated sheet metal plate and a holding tank on the floor, plastic covering, 1 service booklet.
Colors: Cabinet body and doors in light gray RAL7035 or signal yellow RAL1004, powder-coated.
Note (s): Safety cabinets should be subject, at regular intervals (annually), to appropriate maintenance and verification of their proper functioning by a competent person.
Height adjustment in 32 mm steps
Fire resistance: 90 min
Height: 1,968 mm
Width: 1,196 mm
Depth: 616 mm
Number of shelves: 3
Permissible shelf load: 75 kg
Number of retention basins on the ground: 1
Volume retention tank on the ground: 33 l
Weight: 453 kg

Swinging honing machine with funnel-type milling machine
All models we offer-ensure the highest efficiency, versatility and safety
All the models can be fitted with suction device
Weight: 100 Kg
Headphones mandatory (according to DIN EN 352)

380V, 1.2 - 1.7kW / 1400 - 2800 rpm

also referenced under: OOMAMARP3000, CRM 85

Included:
Basic-unit Assistant-System
Foot-plate Assistant-System
Scoliosis-unit Assistant-System
Mirror-unit Assistant-System
Head strap with frame Assistant-System
Block and tackle Assistant-System
Seat- / stand-support (with fixing parts)

380V, 1.27 - 1.7kW

also referenced under: OOMAMARPOL3500, CRM 89

CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz

400V, 1.2kW, volume 25m³ / h, 25L tank

The device can be qualified as motorized stationary cycle-ergometer for the movement of the lower limbs.
It includes a computerized control system which allows to perform a cycling exercise by pedalling with the lower limbs from a sitting and semi-reclined position.
It is possible to access the device while sitting in the patient’s own wheel chair. The device is made mainly by a metal structure for the frame which contains the motor for the lower limbs.
The frame is also the support for the computer unit with a touch screen display from which it is possible to manage all the functions. It is also the support for the large handlebar for support and transport. In the case there is no residual motorial activity for the lower limbs, MotoLife allows a passive pedalling motion, in which the feet and the legs are passively pulled by the motor at a given pre-set speed.
MotoLife is suitable for home use as well as for clinics, medical studios and other institutions and it is adequate for passive, assisted or active kinesitherapy. It can adapt itself automatically and in real time to the conditions of the user.
Technical Features
- user interface: 7" colored display with touchscreen
- movement therapy: active, assistive, passive
- resistence levels: 20 levels, 2-20 Nm
- standard passive motor speed: 60 rpm
- motor speed for Parkinson: 100 rpm upon specific request
- max. active pedal speed: 100 rpm
- power supply: 220-240V~ 50/60Hz - 0,83A
- medical device class: II a
- frame height adjustment: min. 90 cm / max. 109 cm
- pedal radius: 3 different positions
- use modality: on wheelchair / other suitable chair
- easy transferring: included 2 castors with rubber coating
- spasticity control function: 3 control levels / inversion of rotation
- motivating training: gaming / biofeedback
- individual data storage: setting parameters and final outcomes
- software update / Data export: by USB key at home
- dimensions: W 52 cm x D 56 ÷ 70 cm x H 80 ÷ 100 cm
- weight: 48 kg

Cover plate, plaster dosing worm gear, 4 swivelling wheels, plaster bag ripper
706x1100x1228mm
230 liters

set of 22 sizes, left and right (44 pieces)

Moveable step platform and step, padded seat and back
Dimensions WxDxH 780 x 1,100 x 1,190 mm
Material Synthetic leather cover, chrome-plated square tube frame
Chair width 540 mm
Seat height 860 mm
Height of the step platform 390 mm
Weight net/gross 37/41 kg
Cover colour White

Features:
- sturdy design made of square steel tube
- container made of 1,5 mm sheet metal steel
- plaster discharge in front with slide
- fine allotable plaster quantity with conveyer screw
- cover lid easy to open with safe retention via 2 gas springs
- removable grate with opening device for plaster bags
- lid with dust seal
Technical data:
- dimensions W x D x H: 750 x 750 x 1320 mm
- capacity: 340 litre / 320 kg
- conveyer screw: Ø 95 mm
- pipe: Ø 100 mm
- colour: RAL 7035 light grey

Uniformly heats thermoplastic sheet materials commonly used to form prosthetic and orthotic devices. Infinitely adjustable temperature. Heating surfaces are coated with air permeable Teflon sheeting.Two gas cylinders assist in lifting the cover and hold it open at a 45° angle.

Dimension : Out Side: W.125—D.110—H.90 cm
Dimension : Top cover Open: W.125—D.110—H.180 cm
Dimension : Heater Area: W.100—D.85 cm
Power Supply: 220 Volt 50 Hz
Power cord: With CEE plug 5 × 16 A and CEE socket 5 × 16
Heating Pipe: Type 12 pcs / 550 x 12 : 6.600 Watt
Temparature Control: Digital Control 250 °C Max. J Type
Process Completed: Sound and red warning lamp
Upper and Lower Surface: Teflon 0.25 mm
Color: Ral 7035 & 7045
Weight Net: 152 Kg
Boxed : Dimension and Total Weight: W.140 -D.120- H.120 cm 225 kg

The Alfatrac HT is a complete microprocessor controlled traction unit for lumbar and cervical traction. The unit can work in continuous and intermittent mode. The operator can use a large number of preset treatments and has at his disposal a memory capacity up to 50 different personalized codes.
Choice between the following modes: static, progressive, regressive, cyclic, combined.
A patient emergency stop with remote control allows the patient to stop the session. A large LCD display shows the functions. An acoustic signal indicates the end of traction. Without accessories.

Technical Features:
- OS: Windows CE
- mains: 110-230V - 50/60 Hz
- consumed power: 80 VA
- maximum measurement range: cervical treatment 25 kg, lumbar treatment 90 kg
- treatment time: 1 - 60 min
- dimensions: 41 x 42 x 18 cm
- weight: 12 kg

for: 758F200/758F220 Safety storage cabinet
Version: According to directive 2006/95/EC (Low Voltage Directive), directive 2004/108/EC (EMC Directive), directive 94/9/EC (ATEX) labelling: EX II 3/- G Ex ic nA IIB T4 Gc
Equipment: 760E14 Active carbon filter for filtering solvent vapours (hydrocarbons), filtration up to 99.99% under normal operating conditions, VDE* tested filter monitoring, VDE* tested exhaust monitoring, connection cable, mains plug *VDE: Association for Electrical, Electronic and Information Technologies
Dimensions WxDxH: 305 x 555 x 210 mm
Volume flow: 25 m /h
Material: Powder-coated thin steel sheet
Speed: 2.450 min-1
Sound intensity level: 39 dB(A)
Electrical connection in V/Hz/kW: 1 x 230 N/PE / 50-60 / 0.03
Weight: 17 kg
Colour: Light grey (RAL 7035)
To be used for: Ventilating security storage cabinets without additional exhaust ducts
Current draw: 0.13 A
Consumables: 760E14 Active carbon filter
Optional accessories: To be installed on 758F200 or 758F220 Security storage cabinet (760E13 adapter for air circulation filter needed)

STANDARD AND ECONOMY VERTICALIZATION TABLES CHARACTERISTICS:
lifting force of 225 kg, therefore suitable for heavy patients
height and righting by electric motor with manual control
large wheels and centrally controlled brakes on the Standard model, wheels with individual brakes on the Economy model
the double foot support can be individually tilted from + 15 ° to -30 °
supplied with retractable handles and set of fixing straps depending on the model
Adjustable work table on the Standard model (option for Economy model)
goniometer for reading the inclination
90 ° full standing position
minimum height 47 cm and maximum 101 cm
base accessible to patient lifts
self-lubricating moving parts ensure quiet operation
standard width: 70 cm
cover available in various colors

Sheet steel cabinet body with integrated door locking system, interior body with chemical resistant surface.
Shelving for 32 mm pitch shelves.
Ground retention tank (according to StawaR).
With exhaust air connection (NW 75).
With door locking system.
Lockable with a profile half-cylinder, can be integrated into a house lock. Not compatible with the Hoffmann locking system.
With 4 adjustment elements to compensate for slight unevenness in the floor.
2 doors
Correct storage of flammable hazardous products in work rooms.
Standard: DIN EN 14470-1, type test (tested in a fire chamber), 90 minutes fire resistance.
Delivery: Cabinet with 3 shelves, a perforated sheet metal plate and a holding tank on the floor, plastic covering, 1 service booklet.
Colors: Cabinet body and doors in light gray RAL7035 or signal yellow RAL1004, powder-coated.
Note (s): Safety cabinets should be subject, at regular intervals (annually), to appropriate maintenance and verification of their proper functioning by a competent person.
Height adjustment in 32 mm steps
Fire resistance: 90 min
Height: 1,968 mm
Width: 596mm
Depth: 616 mm
Number of shelves: 3
Permissible shelf load: 75 kg
Number of retention basins on the ground: 1
Volume retention tank on the ground: 22l
Weight: 278 kg

For processing all types of leather, rubber and other materials. With long arm and frame pressing device. Cutting width up to 190 mm, splitting and cutting width max. 30 mm.

Vacuum-press for pairwise manufacturing of insoles and foot-orthotics. With vaccum pump

Type: Vacuum-press , Bench-top version
Frame Dim. (LxW): 520 x 350mm, gas-shock supported, frame tension adjustable
(equipped with Soft-bladder)
Vacuum-Pump: Rotary vane, oil- and maintenance-free, 6 m/h / 200mbar, vacuum-automatic controlled
Power supply: 230V / 50Hz
W 360 x D 650 x H 250 mm W 360 x D 650 x H 250 mm
Weight: 30 kgs

- parallel bars for market reclamation
- length: 4 m
- wooden floor covered with non-slip pvc
- for children and adults
- 360 ° swivel handrail
- variable height from 50 to 90 cm
- variable width from 36 to 87 cm
- handrail diameter: 4 cm

Dimensions WxDxH: 600 x 600 x 990 mm
Material: Steel
Vacuum connection: 13mm
Weight: 45 kg
Colour: Light grey (RAL 7035)
Scope of delivery: 704B1=140 vice, 704G11 clamping fixture "Orthofix" for exhaust tubes, 755X221 vacuum pipe with exchangeable vacuum forming plate (diameter 360 mm), ball valve, 4m hose, mounting materials for bolting to the floor
Optional accessories: 704Y30 Floor plate - Steel, galvanised, 800 x 800 x 10 mm
755X181 Foot pedal for vacuum control

Double screws design
It can prevent the loosening of the tube.

Flexion/Extension separately adjustable
The adjustable design of the hydraulic cylinder can be fine-tuned for the knee flexion and extension velocity independently to establish more natural and stable gait.

Adjustable initial ICR
The bumper adjustable screw is for adjust user's individual gait requirements.

Colorful cover
The anterior and posterior cover can protect the internal structure of X60, and prevent the entry of dust.

Best sealed bearing
High strength and precision stainless bearing can increase the stability and the durability of the product.

Incorporating both an adjustable angle backrest and an adjustable head/foot section with breathing hole and plug, these tables are specifically designed for lumbar and cervical traction and feature an integral rolling top design to facilitate effective traction procedures. Supplied with machine mount.
- safe working load and lifting capacity (from minimum height) of 240 kg
- integral rolling top design to provide more effective application of traction forces
- adjustable height mount for traction machine with offset positioning for changing angle of traction application
- adjustable angle backrest from horizontal to +80°
- adjustable angle head/foot section from -25° to +75° with breathing hole and plug
- the power assisted backrest and foot sections incorporate anti-trap design gas struts
- electric height elevation from 48 to 99 cm by means of a foot switch
- retractable wheel design and adjustable foot for stability on uneven surfaces
- fixation point for optional cervical traction accessory
- oilite bearings on all pivot points
- hand switch fitted as standard on electric models
- standard width 70 cm
- choice of upholstery color

To be used for functional plaster casting under weighted conditions
Dimensions WxDxH: 600 x 800 x 1.115 mm
Space requirements: 2,000 x 2,000 mm
Weight (net): 21 kg

includes 2 thermoregulatore and 2 probes

Plastic coated enclosed unit, with two drawers and two swing doors, seamless table top, with three sided gallery with an adjustable plastic shelf, push handle and four wheels, Ø 125 mm, electrically conductive, with wall bumpers
Dimensions WxDxH: 630 x 580 x 930 mm
Working height: 860 mm
Weight: 62 kg
Colour: grey-white (RAL 9002)

- for warming of thermoplastics (low temperature PE = Streifytherm,
Turbocast)
- the good insulation of the unit guarantees a fast warming of the water
Features
- with lid
- low energy consumption
- exact temperature adjustment
- capacity: 40 liters
Technical Data
- outer dimensions L x W x H: 770 x 430 x 340 mm
- inner dimensions L x W x H: 700 x 360 x 190 mm
- temperature range/digital display: 30 - 95° C
- accuracy: +/-1° C
- accesory: grate and drain
- power requirements: 230 V / 50 Hz / 0,9 kW
- material: stainless steel
- weight: 19,5 kg net

T-PLATE foot pressure plate is the most accurate and cost-effective way to identify the plantar pressure profile.
Traditional tools cannot provide the same information as the T-Plate. It will increase your credibility and most of all help you make the good diagnosis.
Deliver with software and manual in English.

for plaster casting under body load incl. base plate 145M21 and one casting ring set 145M22/S
mobile use with transport castors and -handle
space saving due to built-in folding mechanism
quick-adjustment lever provides even easier height settings of the casting apparatus in seconds
high quality, sturdy choice of material
exact adjustment options by means of crank handle

Technical data

space required: 2000 x 2000 mm
dimensions W x D x H: 900 x 600 x 1120 mm