On PE-coated fabric, universal repair tape suitable for rough surfaces, water-resistant, with strong adhesion.

1H10Y — foot with carbon keel and hydraulic ankle
providing smooth and simple adjustment of heel height
in wide range.
The foot is intended for the patients with different activity
levels, unilateral or bilateral trans-femoral amputation at
all levels or trans-tibial users; it can be used in prostheses
after the disarticulation of knee or hip joint.
The carbon foot with the medium and high degree
of energy saving is intended for the amputees from 50 kg
to 125 kg.
1H10Y foot is available in 5 categories of stiffness
depending on the patient weight.
The foot has the improved quality of damping in the phase
of front push, easy and smooth rollover. Energy response
grows with an increase of walking speed due to nonlinear
increase in stiffness of carbon fiber element.
Design of the front elastic element provides the increased
stability in stance phase and energy response in the
phase of rear shock. The foot is produced in right and left
versions.
Activity level: M1, M2, M3,
Maximum patient weight: 125kg
Build height: 115mm

Carbon Foot is intended for patients with M1–M3 activity
level unilateral or bilateral transfemoral amputation at all
levels or transtibial amputation on the boundary of the
upper, medium and lower-third of it, can be used in prostheses
after the disarticulation of the knee or hip joint.
The foot is produced in right and left versions in 7 categories
of stiffness that are selected depending on the
patient’s weight from 45 kg to 125 kg.
Carbon Foot has the improved quality of damping in the
phase of front push, easy and smooth rollover.
Application of the front elastic element with nonlinear
stiffness characteristics provides a return of energy proportional
to the walking pace.
Design of the front elastic element provides the increased
stability in stance phase and energy return in the phase
of rear shock.
The cosmetic footshell of 1H21Y foot has a slim design
and will be convenient for women’s shoes. The cosmetic
footshell of 1H20Y foot has a standard design.

Because bacteria hide everywhere. The wall dispenser ensures a particularly hygienic hand washing process. Trigger the pumping mechanism with your elbow or forearm and avoid direct contact with your hands. The dispenser can be filled with liquid soap or disinfectant in just a few steps. Its simple and functional design makes it a versatile tool for use at home or in catering as well as at work.

Main specifications
Height: 28cm
Material: Metal
Volume: 500ml

Made of aluminium, ALBATROS is a particularly lightweighted and sturdy wheelchair.
The frame is foldable and features a double cross for added security. The wheels
are equipped with a quick-release axis. The swing away armrests enable easy
transfers, and the footrests can be folded or removed.
• Double cross aluminium frame
• Quick release wheels
• Foldable and removable footrests

The AIREX® Corona has been our most popular exercise mat for years and delivers outstanding features. It fulfills all the key points that health professionals expect from a perfect exercise mat - the reason why the Corona has become the No. #1 in physiotherapy and personal training. It offers enough space for all kinds of exercises and is so comfortable that it motivates the user to go to new heights. The wearing comfort, the skin feel and the hygienic properties are first class.

Intended purpose:
The AIREX® products are designed as a movement therapeutic aid for both institutional and domestic use. An object lying on the floor serves as a support for a person during medically indicated and prescribed exercises to improve motor skills and balance or postural control and / or for the therapeutic movement treatment of muscle weakness in the limbs and trunk as a result of a neurological or orthopedic disease.

Certifications: AGR, CE, MD, Sanitized, Swissmade
Characteristics: Comfortable, Dampening, Hygienic, Long-lasting, Water repellent

CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz

FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter

Max load: 125kg

Our fiberglass is “E-glass”, and is one of the most widely used all-purpose composite reinforcements. Structural E-glass is made from strands of continuous glass filaments that are plied and twisted into yarns.
Combination of physical and electrical properties

Excellent for strength and lighter weight lay-ups, one of the strongest and stiffest reinforcements available
- 12K Tow
- 45 degree angle braid
- Rigid reinforcement

Functions and benefits
The Rehab'Impulse Passive Hand is a cosmetic hand made of soft thermoplastic polyurethane. Besides its natural appearance, it allows passive handling and holding of small objects. It is available in two sizes and four colours. The large size is recommended for men while the medium size is recommended for women and adolescents.
Both hand sizes feature an M10 interface.

Intended use
This product is intended for prosthetic fitting on adults and adolescents and is exchangeable with a hook or a working ring.

Compatibility
A wrist adapter will be made available shortly.

Included in delivery
- 1x Passive Hand

Storage conditions
- Store product in dry conditions
- Store at room temperature (ideally between 15°C and 25°C)
- Keep out of direct sunlight or other sources of light with a high UV content
- Take precautionary measures against sparking and fire

Environmental conditions
Recommended environmental conditions:
- Temperature range for use : -10°C to 60°C (14°F to 140°F)
- Relative humidity 0% to 90%, no condensing situation
- Avoid exposure to dust, sand, salt water, acids and urine

Automatic control panel with digital control
Terminal board (Omission with socket combination 3)
Diesel filter with water trap
Crane loading lug
The main battery switch
Hot engine parts protection
Connection for a 230 V / 16 A battery charge (only in conjunction with a socket combination)
Manual oil scavenger pump

3x800x800mm

Build height: 14mm
Maximum patient weight: 150kg
Material: Titanium
Weight: 59g

Directions
- Protection cream and skin care in high demand
- in case of contact with aqueous solutions, surfactants, alkaline solutions
- when handling plasters or substances insoluble in water, e.g. oils and lacquers.

Properties
- Oil-in-water emulsion
- pH neutral
- moisturizing
- quick to put on
- has a regulating effect on the water balance and elasticity of the skin
promotes regeneration
- Protects against water, fluids, dirt, chemicals or detergents

4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

Body width: 490 mm
Body depth: 190 mm
Body height: 409 mm
Material of the housing: Plastic
Colour of housing: blue
Connection outlet: 1/4 in
maximum operating pressure: 16 bar
Hose external ⌀: 12 mm
Hose internal ⌀: 8 mm
Material of hose: Polyurethane
Colour of hose: blue
SCS automatic roll-up drum: yes

IP20: Protection against ingress of foreign bodies of ⌀ < 12 mm, but all contact must be avoided, and no protection against water.

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36

Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Long service life and smooth running due to balanced rotor with quality ball bearings
Spark protection on each grinding wheel reduces flying sparks
Sight glasses made of shatterproof material
Vibration damping rubber feet
Coarse and fine grinding wheel (K36/K80) as standard

L-form shaft; ball point can be applied up to an angle of 30°.
PB Swiss Tools special steel combining maximum hardness with exceptional toughness. Surface nickel-plated and chrome-plated, edges slightly chamfered.
Content:
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8
Presented in: Plastic clip

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Version:
Multi-purpose drill with especially sharp carbide insert for precise holes in different materials. Large-volume helical flute for quick removal of dust and chips. Shank of annealed special steel.
Application:
For drilling various materials, including in a single operation:
Bricks, porous concrete, lightweight materials, plastics.
Tiles, ceramics, marble, glass.
Metal and material combinations in a single operation, such as when fitting windows or when reinforcing concrete.
Content:
1 each drill Size. (⌀) 4; 5; 6; 6; 8; 8; 10
Note:
Caution: only for rotary use (without hammer action!)
Faster drilling and more holes per battery charge than with hammer drill bits.

Countersink sets, in a case
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 4,3; 5; 6; 6,3; 7; 8; 8,3; 10; 10,4; 11,5, 12,4; 15; 16,5; 19; 20,5; 23; 25
Number of countersinks: 17
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

Square drive: 3/8 in
Total length: 305mm

Square drive: 3/8 in
Total length: 200mm

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 160 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm

Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 200 mm

- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg

- can hold all the necessary tools for prosthetic treatment
Specifications: 2 wheels, extendable handle, 111-120 liter
External dimensions: 43x36x79cm
Weight: 2.8kg

- protects and separates tools during transport
Specifications: padded, adjustable partitions, handle
External dimensions: 48 x 34.5 x 19.5 cm
Weight: 1.35kg

- creates extra space in socket for sensitive areas when adjusting
Specifications: 6x silicones pads, 2 of each shape
Dimensions: 3 x 7 x 3cm, 7.5 x 8.2 x 3cm, 3.5 x 3.5 x 3cm

Filter and manometer included

- for fittings at the clinic and on the go
Weight: 4.4kg
Size: 30.5 x 12 x 17cm
Max. Vacuum: 0.8 bar
Flow Rate: 68 l/min

Build height: 5mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 84g

Build height: 14mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 89g

Build height: 14mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 98g

- for even heating of the Confidence Socket
- heated using a heat gun

Specifications:
Oven Hood, Stand, Silicone Base & Insulation Cap