with rolling stand, 230V 250W

aluminium, to determine pelvic alignment
74-00743

max. 200kg
XMEQSCALAD

Measuring point: armpit; mouth; rectal
Type: Medical thermometer
User: Adults
Number of memory locations: 1 ×
Measurement accuracy: +/- 0.1 ° C

Non-contact Body Infrared Thermometer is so easy to use.
Just point and press the button and it read the temp so easy.
0.5 second rapid measurement temperature, can measure the human body ,object ,indoor temperature.
Body temperature measurement: aiming towards the forehead with the distance of 5-13cm.
Different backlight color for different temperature range under Body mode.
Making sure there is no hair, perspiration, cosmetic or cap covered on the forehead.
Display Backlight: 3 Colors (Green/Normal; Orange/Slight Fever; Red/High Fever)
Ergonomic design
Compact and lightweight

Brand: DIKANG
Model: HG 01
Temperature Range: 32°C - 42.9°C
Response Time : Instantaneous
Emissivity: 32-43 °C (89.6-109.4 F)
Material: Plastic
Certification: CE, FDA

Oxygen saturation meter
Also suitable for travel thanks to the carrying strap
Automatic shutdown after 8 seconds
6 display screens and 10 brightness levels
Display of the measured value on a two-color OLE screen
Display of measured values ​​as bars or waves
Battery level indicator

For diagnostic percussion
Different size rubber inserts at both ends of the head
Incl. brush
Incl. needle
Material: metal
Length: 19cm
Weight: 100g

Fully automatic upper arm electronic blood pressure meter with preformed cuff
The Intellisense Technology ensures that cuff inflates neither too tightly or too loosely. The dual check system ensures that the sensor performing the reading is checked by a second sensor to ensure greater accuracy.
- large digits offer easy read-out
- one button for all functions
- with bag

The new Sonic HT is an advanced and complete device for professionals allowing 1/3 MHz multifrequency ultrasound.
The Sonic HT is provided with a special ergonomic head capable to generate 1 or 3 MHz frequency but can also combine both frequencies allowing penetration into different cellular layers at the same time. Pulsed and continuous emission up to 15 W (3 W/cm²).
Provided with a special device attesting no-coupling and contact between the head and the patient's skin, with an acoustic and visual signal.
All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
The versatile Windows CE operating system ensures possible upgrading.
A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
Free memories for entering customized protocols.

Technical Features
frequency: 1 - 3 MHz
modes: continuous and pulsed (from 20% to 80%)
modulation from 20 to 200 Hz
multifrequency head 5 cm²
intensity max.: 3 W/cm²
low BNR
contact control
color touchscreen 400 x 800 pixels
power supply: 115-230 V~ 50/60 Hz
consumed power: 80 VA
dimensions: 40 x 30 x 23 cm
safety class: class I type B according to IEC 601-1
Directive EEC 93/42: IIa

The new Multistim HT VAC is an advanced and complete universal electrotherapy device made for professional users, with built-in vacuum module.
Low frequency currents:
biphasic, Tens, diadynamic (50-100Hz – CP, LP, 50 Hz and 100 Hz interrupted), rectangular, triangular, exponential, galvanic, galvanic interrupted, ionophoresis, faradic (triangular, rectangular, neodyn), Trabert, ultra-reiz
Medium frequency currents:
IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF stimulation, isodynamic, Kotz
All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
The versatile Windows CE operating system ensures possible upgrading.
A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
Free memories for entering customized protocols.

Technical Features
2 independent patient circuit
max. intensity:
• low frequency currents: 76,5 mA (153 mAp)
• medium frequency currents: 127 mA (153 mAp)
frequency from 2,5 to 20 kHz
vacuum module:
• continuous or pulsed mode
• double output allowing bipolar or quadripolar application
• pressure: 0,6 bar
color touchscreen 400x800 pixels
power supply: 115-230 V~ 50/60 Hz
consumed power: 80 VA
dimensions: 40 x 30 x 23 cm
safety class: class I type BF according to IEC 601-1
Directive EEC 93/42: IIa

The new Multistim HT VAC is an advanced and complete universal electrotherapy device made for professional users, with built-in vacuum module.
- Low frequency currents:
biphasic, Tens, diadynamic (50-100Hz – CP, LP, 50 Hz and 100 Hz interrupted), rectangular, triangular, exponential, galvanic, galvanic interrupted, ionophoresis, faradic (triangular, rectangular, neodyn), Trabert, ultra-reiz
- Medium frequency currents:
IF bipolar, IF quadripolar, IF isoplanar, IF vectorial, MF stimulation, isodynamic, Kotz
- All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
- The versatile Windows CE operating system ensures possible upgrading.
- A wide range of preset protocols with body maps is available for setting most important therapies into the fields of physical therapy, sports medicine, orthopedics, vascular and aesthetic medicine.
- After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
- Free memories for entering customized protocols.
- 2 independent patient circuit
- max. intensity:
• low frequency currents: 76,5 mA (153 mAp)
• medium frequency currents: 127 mA (153 mAp)
- frequency from 2,5 to 20 kHz
- vacuum module:
• continuous or pulsed mode
• double output allowing bipolar or quadripolar application
• pressure: 0,6 bar
- color touchscreen 400x800 pixels
- power supply: 115-230 V~ 50/60 Hz
- consumed power: 80 VA
- dimensions: 40 x 30 x 23 cm
- safety class: class I type BF according to IEC 601-1
- Directive EEC 93/42: IIa

The new TRC HT is an innovative device for performing Therapeutic Resistive Capacitive Diathermy.
TRC is the new and more effective approach in diathermy for all the professional operators who are looking for something more than a traditional diathermy unit (microwaves or shortwaves).
TRC is more selective than shortwave and microwave.
Resistive Diathermy generates a deep action over bone, ligaments, tendons and muscles. It could also be used for drainage and relaxing contractions. Heat effect is generally quite important.
Capacitive Diathermy produces biological stimulation, particularly over the treated area just where the electrode has been placed. It’s athermal or a comfortable minimal heat effect.
Further to the main massage application, Resistive and Capacitive Diathermy can be also performed by placing a static applicator over the area to be treated.
All the functions are visualized on a large color LCD. In addition to the usual and traditional keys and buttons, it is possible to adjust every parameter on the touchscreen.
The versatile Windows CE operating system ensures possible upgrading.
A wide range of preset protocols with body maps is available. After a pathology is chosen, the screen will show the body parts to be treated and the unit will suggest the parameter values to set.
Free memories for entering customized protocols.
Technical Features
- frequency: 485 kHz ± 10 Hz
- emission: continuous and pulsed
- power: adjustable from 20 to 180 W
- impedance: in real time
- temperature sensor
- color touchscreen 400 x 800 pixels
- power supply: 115-230 V~ 50/60 Hz
- consumed power: 750 VA
- dimensions: 40 x 30 x 23 cm
- safety class: class I type BF according to IEC 601-1
- Directive EEC 93/42: IIb

This new 4-section pressure therapy unit for daily well-being is especially suitable for solving circulation problems and the imperfections caused by cellulite and water retention in the most difficult areas. It is supplied with 2 leg garments and 1 belly garment. The applications of Farma Press Digital are numerous: anti-cellulite, lymphatic drainage, venous drainage, swelling of the extremities, post-surgical edema, lymphoedema, reduces fluid retention, venous insufficiency.
Technical Features
· Pressure: adjustable from 30 to 250 mmHg
· Output channels: 4
· Timer: 10, 20 or 30 minutes
· 3 compression modes: alternative, compressive and sequential
· Remote control
· Dimensions: L 110 x W 250 x H 180 mm
· Total weight (instrument + accessories): 4 kg
· IP rating: IP20
· Safety class: class II type BF
· Mains supply: 230V~ 50Hz

Ice bag in fabric. The fabric assures a good transmission of cold and a pleasant touch on the skin.

Easy assembly
4 elements
Galvanized steel structure
Dimensions: 200 x 104 x 214 h cm
Safe working load: 150 kg
Medical device

Max: 154kg

Microprocessor controlled unit for passive mobilisation of knee and hip - adjustable speed, force and work time - repetition at flexion and extension limit - built-in 24V alimentation
The Fisiotek 3000 has a programming console with cognitive display, clear images and easy to set parameters. The new aluminium structure also allow support of stout limbs.
Mobile programming keyboard, listing all the functions, for versatile use at the professional level and at home.
Technical Features
- range knee movement: -10° - 120°
- range hip movement: 7° - 115°
- speed: 0,8°/s - 3,5°/s
- force: 0 - 40 kg
- adjustable foot support
- warm up cycles via menu
- pause during flexion
- repetition at flexion and extension limit
- mains supply: 90/250V 50/60Hz
- safety class: class 1B standard EN 60601-2
- CE directive 93/42: class IIa
- weight: 9,5 kg

For cervical traction - includes:
- neck harness
- transverse suspension bar
- set of washable pads

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

-weights for wrists and ankles
-delivered by pair
-suitable for fitness exercises and endurance training at home
-made of neoprene
-reinforced with cotton ribbon
-adjustable velcro strap

Build height: 30,4mm
Maximum patient weight: 125kg
Material: Titanium
Weight: 210g

Built height: 40mm
Maximum patient weight: 100kg
Material: Stainless steel, Aluminium
Weight: 285g

Built height: 12mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 151g

The hydraulic adapter 2H08 is designed for smooth heel height adjusting in the prosthesis.

Mobility level: 2-3
Build Height: 75mm
Maximum patient weight: 125kg
Weight: 360g

Adjustable adapter is used for accurate and repeated
adjustment.
Allows to displace the clamp 1 relative to the clamp 2 from
the center position in one or the other side up to 11 mm,
both parallel and perpendicular to the sagittal plane.
Due to the angular adjustment may shift in either direction
up to 7,5°

Build height: 35mm

Adjustable adapter is used for accurate and repeated
adjustment.
Allows to displace the clamp 1 relative to the clamp 2 from
the center position in one or the other side up to 11 mm,
both parallel and perpendicular to the sagittal plane.
Due to the angular adjustment may shift in either direction
up to 7,5°

Build height: 39mm

Sliding adapter is intended for use in femoral prostheses
above the knee to create the optimum design and allow
the fine adjustment of socket position by gradually moving
along an arc in the sagittal plane in the range of adjustment
up to 4°. The position of the socket can be further
adjusted.

Build height: 48mm
Maximum patient weight: 150kg
Material: Aluminium Alloy
Weight: 233g

Sliding adapter is intended for use in femoral prostheses
above the knee to create the optimum design and allow
the fine adjustment of socket position by gradually moving
along an arc in the sagittal plane in the range of adjustment
up to 4 . The position of the socket can be further
adjusted.

Build height: 24mm
Maximum patient weight: 150kg
Material: Aluminium Alloy
Weight: 233g

Sliding adapter is intended for use in femoral prostheses
above the knee to create the optimum design and allow
the fine adjustment of socket position by gradually moving
along an arc in the sagittal plane in the range of adjustment
up to 4 . The position of the socket can be further
adjusted.

Build height: 18mm
Maximum patient weight: 150kg
Material: Aluminium Alloy
Weight: 165g

Build height: 37mm
Maximum patient weight: 125kg
Material: Stainless steel
Weight: 140g

Build height: 24mm
Maximum patient weight: 100kg
Material: Aluminium
Weight: 101g

Build Height: 10mm
Maximum patient weight: 125kg
Material: stainless steel
Weight: 150g

Build height: 10mm
Maximum patient weight: 150kg
Material: Titanium
Weight: 88g

Build height: 10mm
Maximum patient weight: 100kg
Material: Aluminium
Weight: 88g