for leather and fine metal sheets

Replacement wheel with needle bearing and quick-change axle.
Technical data
⌀ wheel 20 mm
Wheel width 6.2 mm
Roll bore 7.8 mm

Lightweight and durable magnesium metal body with needle bearing and thumbwheel guide rollers. Hand deburrer retractable in the body. With spare rollers.
Advantages):
Automatic hold and tightening on the tube thanks to the quick one-hand QuickLock adjustment.
Quick and precise positioning of the wheel according to different tube diameters.
Use:
Universal for cutting thin-walled stainless steel, copper and aluminum tubes (up to 2 mm thick).
Technical data
For ⌀ ext. pipe: 6mm - 35mm

Body of stainless steel drop forged. Wear-resistant spindle with plastic handle. Cutter wheel for steel pipes of stainless steel, accurately hardened for long tool life. Guide rollers of special steel; chrome-plated.
For clean and right-angled cutting off of pipes.
The external burr is rolled over automatically when cutting. The cut pipe end is immediately ready for thread cutting.
Cutter wheel: ⌀32 mm
Cutter wheel width: 19 mm
Cutter wheel bore: 9 mm
for pipe outer: ⌀1/8 − 2 inch
Number of guide rollers: 2
Number of cutter wheels: 1
ETOOCUTTPI51

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (⌀ 2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm).
Use a soft material, e.g. leather, as an underlay to avoid damage when a lot of pressure is applied.

for perforating leather, fabric and plastic, with 6 interchangeable nozzles with a diameter of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm, with opening spring and locking system, powder coated for good rust protection, gripper body and nozzles: special tool steel, oil hardened
ETOOPUNCRP01
74-00839

Strong pressed steel shanks with rotating wheel and lock. With 6 different hollow punches (2.0; 2.5; 3.0; 3.5; 4.0 and 4.5 mm ⌀).
70% less force required due to efficient leverage. Ergonomically shaped plastic grips.
For soft materials such as leather use an underlay to avoid damage when a lot of pressure is applied.
overall length: 250 mm

250W

with rolling stand, 230V 250W

aluminium, to determine pelvic alignment
74-00743

max. 200kg
XMEQSCALAD

Measuring point: armpit; mouth; rectal
Type: Medical thermometer
User: Adults
Number of memory locations: 1 ×
Measurement accuracy: +/- 0.1 ° C

Non-contact Body Infrared Thermometer is so easy to use.
Just point and press the button and it read the temp so easy.
0.5 second rapid measurement temperature, can measure the human body ,object ,indoor temperature.
Body temperature measurement: aiming towards the forehead with the distance of 5-13cm.
Different backlight color for different temperature range under Body mode.
Making sure there is no hair, perspiration, cosmetic or cap covered on the forehead.
Display Backlight: 3 Colors (Green/Normal; Orange/Slight Fever; Red/High Fever)
Ergonomic design
Compact and lightweight

Brand: DIKANG
Model: HG 01
Temperature Range: 32°C - 42.9°C
Response Time : Instantaneous
Emissivity: 32-43 °C (89.6-109.4 F)
Material: Plastic
Certification: CE, FDA

Oxygen saturation meter
Also suitable for travel thanks to the carrying strap
Automatic shutdown after 8 seconds
6 display screens and 10 brightness levels
Display of the measured value on a two-color OLE screen
Display of measured values ​​as bars or waves
Battery level indicator

For diagnostic percussion
Different size rubber inserts at both ends of the head
Incl. brush
Incl. needle
Material: metal
Length: 19cm
Weight: 100g

Fully automatic upper arm electronic blood pressure meter with preformed cuff
The Intellisense Technology ensures that cuff inflates neither too tightly or too loosely. The dual check system ensures that the sensor performing the reading is checked by a second sensor to ensure greater accuracy.
- large digits offer easy read-out
- one button for all functions
- with bag

Included:
Basic-unit Assistant-System
Foot-plate Assistant-System
Scoliosis-unit Assistant-System
Mirror-unit Assistant-System
Head strap with frame Assistant-System
Block and tackle Assistant-System
Seat- / stand-support (with fixing parts)

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

Equipment:
Quick-action clamping device, two inflatable clamping devices for attaching sockets, holder for knee joint adapter inserts, integrated measuring accessories, e.g. mm rulers, goniometers, height-adjustable footplate, TT and TF alignment pads. To be used for bench alignment of Ottobock modular lower limb prostheses (TF and TT) according to Ottobock alignment recommendations
Dimensions:
WxDxH 800 x 900 x 2,100 mm
31 1/2 x 35 3/8 x 82 5/8 inch
Scope of delivery:
Includes one right and one left adapter insert for Ottobock knee joints (adapter insert article numbers: 743Y579, 743Y580, 743Y581, 743Y582, 743Y583, 743Y584, 743Y608, 743Y629, 743Y681)

The heel height measuring device comes with an integrated database for storing user data and orders, a multilingual display (DE, EN, NL, FR) with backlight, colour touchscreen with measurements in cm, mm or inches as well as a sturdy and easy-to-clean lower plate with crosshairs to help you position measuring objects precisely. Straightforward zero point calibration (alternative: using the lower plate(s) as the reference point).
Dimensions WxDxH: 500 x 400 x 600 mm
Electrical connection in V/Hz/kW: 1 x 230 / 50–60 / 0.1
Colour: light grey [RAL 7035]
Material: Steel, stainless steel, aluminium
Type of Planning and Equipment: Orthopedic Shoe Technology and Leather Processing

- Adapter ring, holder for suction hose, for clamping in a vice
- Structure made of square and galvanized steel tubes
- Holder for SACH* foot adapter 743Y34 Cylindrical head screw 501T3=M10X60 SACH* foot adapter with threaded connection 2R8=M10 Single-channel suction hose 755R90, dimensions WxDxH 42 x 30 x 400 mm, connection Ø 13 mm Two-channel suction hose 755R100, dimensions W x D x H 42 x 30 x 520 mm, connection Ø 6 mm
- 260 x 1,020 x 300mm, 10kg

110–240 V / 50–60 Hz
During measurement, it is possible to check the effect of joint stabilization with ground reaction forces.
Thanks to the adjustment of plantar flexion under load, the precise adjustment of the medical device can be performed very quickly and in a targeted way:
- Easy transportation
- Modern and functional design
- Data logging of the exhaustive and automatic equipment
- Simplifies communication with caregivers
Tablet with help function:
- Synchronous measurement and representation of the line of force of the two legs with display of the distribution of the load
- Measurement of vertical forces just as in L.A.S.A.R. Posture
- Complete tutorials, help functions and integrated alignment recommendations
- Simplified transition to another view of the camera
- Representation of vertical and horizontal forces indicating actual load
- Screen capture function to quickly record and analyze the conditions of the measurement
- Complete patient database with instrumentation flow, comparison view and possibility of creating a PDF

4 stone drill Ø 5/6/7/8 mm
3 x screwdriver bits L = 25 mm PZ 2/2/2
75 x 3.5 x 30 screws: 25 pieces, 20 pieces 4.0 x 35, 20 pieces 4.0 x40, 10 pieces 5.0 x 50
90 plugs: 30 pieces ø 5 mm, 25 pieces ø 6 mm, 20 pieces ø 7 mm, 15 pieces ø 8 mm
Universal holder, magnetic.

Ideally equipped to handle virtually any task: High-performance DIY enthusiast set for precise, clean drilling in metal, masonry and wood, as well as high-grade screwdriver bits and nut setters for the most commonly used screw head types. Comes with a universal carpet knife.
Features & Benefits
11 metal drill bits, Ø 1.5-6.5 mm, with titanium nitride coating that excel through their fast drilling progress and particularly long service life (not suitable for use in aluminium).
6 robust carbide-tipped masonry drill bits, Ø 4-10 mm, that impress with their long service life, fast stock removal, low heat development and precision.
5 sharp wood drill bits, Ø 4-10 mm, with centring tip and shoulder cutter for precise, tear-free hole drilling, as well as 2 spade bits diameter 16/22 mm with titanium nitride coating.

11 HSS-TiN metal drill bits, Ø 1.5-6.5 mm
6 masonry drill bits, Ø 4-10 mm
5 wood drill bits, Ø 4-10 mm
2 spade bits, Titanium, Ø 16/22 mm
18 screwdriver bits, L=25 mm
PH 1/2/2/3
PZ 1/2/2/3
S 4/6/7
HEX 3/4/5/6
T 15/20/25
3 nutsetters, Ø 7/8/10 mm
1 diameter gauge
1 knife
1 adapter for nut setters
1 universal holder, magnetic
1 countersink

Handle with rotating centring cap and quick-spinning zone. Blade of special steel.
For description see No. 664600, 668800, 625770 and 627470.
12 pieces in a textile tool roll. 1 each slot-head screwdriver No. 664600 size 1.5; 1.8; 2; 2.5; 3. 1 each screwdriver for Phillips No. 668800 size 00 and 0. 1 each screwdriver for Torx ® similar to No. 625770 size TX5 and TX6. 1 each hexagon screwdriver No. 627470 size 0.9; 1.5; 2

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 6 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 5 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 4 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 3 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Single piece, i.e. shank and tip of one piece. Shanks for direct fitting in electric screwdrivers.
With centre hole for socket head screws with a tamper-proof pin.
Application: For hexagon socket head screws DIN 7426.
Standard: DIN ISO 1173
Material: Chrome vanadium special alloy, high strength.
Drive profile: Hexagon screwdriver with hole
Hexagon: 2 mm
overall length: 89 mm
Bit hexagon shank: E6.3

Classic screwdrivers set with wall mount
PH 0; PH 1; PH 2; PH 3
for Phillips screws
precise, true-to-size tips, optimal fit in the screw heads
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee

Multimatized handle with grip zone optimized in terms of torque and comfort

Multimatized handle with grip zone optimized in terms of torque and comfort

Multimatized handle with grip zone optimized in terms of torque and comfort
74-01214

Multimatized handle with grip zone optimized for torque and comfort
74-01213

Multimatized handle with grip zone optimized for torque and comfort
74-01705

Multimatized handle with grip zone optimized for torque and comfort,
74-01704

Multimatized handle with grip zone optimized for torque and comfort
74-01216

Multimatized handle with grip zone optimized for torque and comfort
74-01215

Classic screwdriver set in a high-quality paperboard box

for slotted screws, universal applications
parallel tip, optimum transmisson of force, no cam-out
slim handle, compact and for universal applications
high-quality materials used, impact-resistant and oil/gasoline resistant
special alloy based on spring steel, exceptional elasticity coupled with high grade hardening
laser-marked serial number, lifetime guarantee

Multi-component power handle with grip zone optimised for torque and comfort. Blade of chrome vanadium steel.
1 each slot-head screwdriver size 3.5; 5.5; 7; 8.
1 each screwdriver for Phillips size 1; 2.

Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 250 mm
Blade width: 16 mm

Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 235 mm
Blade width: 10 mm

Long style with wide chamfer; forged; ground bright finish. Each chisel is tested for hardness and edge holding properties.
Material: Top quality special steel with wooden handle.
overall length: 215 mm
Blade width: 6 mm

Micro-serrated. Snip jaws made of stainless steel (HRC 58 − 60), handles of sheet steel, nickel plated. 2-component handle with non-slip insert of soft material, easy on the hand.
Cutting capacity: Metal sheets up to 1.8 mm, stainless steel sheets up to 1.2 mm.
Application:
For curved and short straight cutting.
74-01713

Made of stainless steel, with return spring.
Offset jaws, plastic coated handles.
Widely applicable. Ideal for thin sheet metal, plastics, leather, cardboard, paper, cord, fabrics etc.
overall length: 190 mm
Length cutter: 40 mm