6 slotted screwdrivers 2.5 x 75, 3.5 x 100, 4 x 100, 5.5 x 125, 6.5 x 150, 8 x 175 and 2 PH cross-head screwdrivers no. 1 + 2

Overall length: 180mm
Piano wire cutting values ​​up to ⌀: 2 mm
Standard: DIN ISO 5746
Material: Chrome vanadium steel
surface: chrome
spark-free: no
EAN/GTIN: 3662424087257
Manufacturer number: 187A.18CPE
Execution:
Chrome vanadium steel, chrome-plated head and joint, with heavy-walled covers on handles. Serrated jaws. Plastic opening spring that reduces fatigue. Induction hardened cuts (approx. 64 HRC), also suitable for piano wire.

including Rollabout Tray with integrated Blister Forming frame cradle
Heating with 24 Infrared-Quartz-Tubes, Dual-Zone switching (6/24), Temp.
measurement of the Material surface by opto-electr. IR-sensor, infinitely adjustable
from 30°C to 250°C by SPS controller with PID feature, Software build 3.0 with
maintenance info, programmable Ramp- and Timer-feature with an option to store
slowly raising heat processes, monitoring of the heating process by graphical trend,
tefloncoated (replaceable) Rollabout Tray, 4 casters with stop, height adjustable by
gas-shock (min. 820mm, max. 1050 mm), integrated Blister forming cradle, width
adjustable, retractable when not in use, vertical Frontdoor with double pane Window,
double gas-shock supported, Illum. by two 25W bulbs, colour: colour: RAL7035
(light-grey) / RAL7031 (blue-grey), net weight 360kg
Electr. Conn.: 380-400V / 50-60Hz / 3Ph+N+PE. / 11,1 kW (3 x 32A CEE)
Dim..: outside WxDxH: 1595x1770x1400 mm
inside WxDxH : 1300x1590x500 mm

Developmental dysplasia of the hip (DDH) occurs in approximately 1 or 2 babies in 1,000. The Limbs & Things Infant Hip Exam Trainer has been designed to meet the specific requirements of healthcare professionals training to identify and diagnose DDH.

Limbs & Things worked with leading American paediatrician, Dr Joseph O. Lopreiato, a specialist in Simulation Education, and Elizabeth Weissbord, MA, CMI, to develop this infant hip simulation model.

This infant hip trainer comes with 2 interchangeable lower leg modules that allow trainees to identify the differences between normal and abnormal hip pathologies. The Lower Abnormal hip module’s range of motion gives trainees a realistic representation of the following:

Dislocating a hip that is lax in the socket
Relocating a hip that is dislocated from the socket, feeling the “clunk” as the procedure is completed
Using the Galeazzi sign to identify the visual signs of DDH
Using both the Ortolani Test and Barlow Maneuver on both hip pathologies
Click here for the DDH Training Curriculum.

An infant torso module was included in the trainer to provide a weighted model that has greater stability when in use. It also increases realism over a simple lower leg module.

Good elasticity even in the lower temperature range
Characterized by a very high heat storage capacity
Individual blocks packed in a cardboard box
Package size: 20 kg

Technical characteristics:
Flashlight Function: Focusing
ATEX zone: none
Luminous flux: 300 lm
Lighting duration: 3 h
Power supply: Battery operation
Number of batteries included: 1
Battery type: Li-ion
Battery capacity: 2.6 A h
Total length: 145mm
⌀ head: 35 mm
Weight: 188g
EAN/GTIN: 4045197727244
Description
Execution:
Focusable and very robust cordless LED flashlight made of anodized aluminium. One-handed focusing allows quick and easy adjustment of the light beam. Rotary switch with integrated battery charge indicator and micro-USB port.
Delivery:
With micro-USB charger, wrist strap and GARANT transport box

Technical characteristics:
Type: SP11
Max. working pressure: 24 bar
Maximum operating temperature: 50°C
Air flow: 25 l/min
Flow at 5 bar: 25 l/min

Execution:
Spray gun with straight tube and plastic container, matt red, capacity 1 l.

Suitable for all airbrush devices with 1/8" connection to 1/4" connection.
Characteristics
Connections: 12 / 9 mm (1/4 | 1/8 inch) IG
Diameter (internal): 4 mm
Hose: diameter: Ø 4mm (inside)
Ø 7mm (outside)
Hose: Type: Pond Hose

This pump is designed according to the requirements of the air conditioning systems and enables a professional evacuation of the cold air conditioning circuit.

Due to its outstanding technical characteristics and the robust design, the vacuum pump can also be used for the air-conditioning in your car.

Because of the repeated daily service work and the related cold starts, it is important for the air-conditioning technology that the vacuum pumps are reliable.

• For the mobile use for evacuating refrigeration and air conditioning circuits
• For universal use with refrigerant recovery machines and installation aids
• For evacuating the air conditioning systems from cars and commercial vehicles
• As replacement for air conditioning service units
• Ergonomic handle for the easy and safe transportation of the vacuum pump
• For minimizing the noise the vacuum pump is equipped with rubber feet
• Switch on and off directly at the vacuum pump
• oil-free and therefore maintenance free / no oil mist

Connections: 12.91 mm / 1/4 inch
Dimensions: 415x365x285mm
85x65x105mm
Debit (l/h): 8100 LITERS
Noise level db(A): ≤ 55
Cable length: 1.9 m
Vacuum: 600mm Hg

1000x1000x12mm
cell-polyethylene foam
Application:
-for padding of positioning splints and correctional braces (e.g. orthoses)
Characteristics:
-closed-celled expanded PE
-washable
-suitable for processing with Streifylen and Streifycolor
-molding temperature depending on heat source -approx.100-130 °C
-approx. 15-18 Shore A

On PE-coated fabric, universal repair tape suitable for rough surfaces, water-resistant, with strong adhesion.

Because bacteria hide everywhere. The wall dispenser ensures a particularly hygienic hand washing process. Trigger the pumping mechanism with your elbow or forearm and avoid direct contact with your hands. The dispenser can be filled with liquid soap or disinfectant in just a few steps. Its simple and functional design makes it a versatile tool for use at home or in catering as well as at work.

Main specifications
Height: 28cm
Material: Metal
Volume: 500ml

The AIREX® Corona has been our most popular exercise mat for years and delivers outstanding features. It fulfills all the key points that health professionals expect from a perfect exercise mat - the reason why the Corona has become the No. #1 in physiotherapy and personal training. It offers enough space for all kinds of exercises and is so comfortable that it motivates the user to go to new heights. The wearing comfort, the skin feel and the hygienic properties are first class.

Intended purpose:
The AIREX® products are designed as a movement therapeutic aid for both institutional and domestic use. An object lying on the floor serves as a support for a person during medically indicated and prescribed exercises to improve motor skills and balance or postural control and / or for the therapeutic movement treatment of muscle weakness in the limbs and trunk as a result of a neurological or orthopedic disease.

Certifications: AGR, CE, MD, Sanitized, Swissmade
Characteristics: Comfortable, Dampening, Hygienic, Long-lasting, Water repellent

CHARACTERISTICS
- Motor shaft 1400rpm
- 35mm abrasive accessories
- Horsehair brush and waxing pad
- Cutter shaft 6000rpm with cutter rule
- Pumice motor
- Internal extractor fan
- Dust recovery system with extractable drawers
- Internal fabric filter with back panels for double filtration

MACHINE DIMENSIONS
- Width 900mm - Depth 600mm - Height 1500mm - Weight 140 Kg

POWER SUPPLY
- Single-phase 230V - 1ph - 50Hz

FEATURES
- Complete drive shaft with bayonet connection
- Abrasive ring diameter 100x90mm length 283mm
- Integrated vacuum cleaner and external fabric filter

MACHINE DIMENSIONS
- Width 540mm - Depth 410mm - Height 440mm - Weight 34 Kg

POWER SOURCE
- Single phase 230V - 1ph - 50Hz

MACHINE FEATURES
- Horizontal motor with bayonet connection
- T22 pine cone and pad supplied
- Foot switch operation
- Arrangement for connection to a centralized vacuum system
- 60 mm diameter on the side
- Suction channel adjacent to the pad

MACHINE DIMENSIONS
- Width 700mm - Depth 400mm - Height 400mm - Weight 50 Kg

POWER SUPPLY
- Single phase 230V - 1ph - 50Hz with inverter

Max load: 125kg

Automatic control panel with digital control
Terminal board (Omission with socket combination 3)
Diesel filter with water trap
Crane loading lug
The main battery switch
Hot engine parts protection
Connection for a 230 V / 16 A battery charge (only in conjunction with a socket combination)
Manual oil scavenger pump

3x800x800mm

Directions
- Protection cream and skin care in high demand
- in case of contact with aqueous solutions, surfactants, alkaline solutions
- when handling plasters or substances insoluble in water, e.g. oils and lacquers.

Properties
- Oil-in-water emulsion
- pH neutral
- moisturizing
- quick to put on
- has a regulating effect on the water balance and elasticity of the skin
promotes regeneration
- Protects against water, fluids, dirt, chemicals or detergents

4x1740x960mm
Polyethylene foam material, thermo-moldable at approx. 110-130°C, approx. 30° Shore A

Body width: 490 mm
Body depth: 190 mm
Body height: 409 mm
Material of the housing: Plastic
Colour of housing: blue
Connection outlet: 1/4 in
maximum operating pressure: 16 bar
Hose external ⌀: 12 mm
Hose internal ⌀: 8 mm
Material of hose: Polyurethane
Colour of hose: blue
SCS automatic roll-up drum: yes

IP20: Protection against ingress of foreign bodies of ⌀ < 12 mm, but all contact must be avoided, and no protection against water.

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36

Outer diameter: 200mm
Width: 30mm
Bore: 32mm
Abrasive material: normal corundum
Grain size: 36

Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Long service life and smooth running due to balanced rotor with quality ball bearings
Spark protection on each grinding wheel reduces flying sparks
Sight glasses made of shatterproof material
Vibration damping rubber feet
Coarse and fine grinding wheel (K36/K80) as standard

L-form shaft; ball point can be applied up to an angle of 30°.
PB Swiss Tools special steel combining maximum hardness with exceptional toughness. Surface nickel-plated and chrome-plated, edges slightly chamfered.
Content:
1 each L-wrench: Size 1.5; 2; 2.5; 3; 4; 5; 6; 8
Presented in: Plastic clip

Dimensions WxDxH: 1390 x 980 x 850 mm
Power requirements: 220V / 50 Hz / 9,9 kW
Temperature range: 50 °C - 200 °C
Working surface W x D: 1250 x 1050 x 860mm

Version:
Multi-purpose drill with especially sharp carbide insert for precise holes in different materials. Large-volume helical flute for quick removal of dust and chips. Shank of annealed special steel.
Application:
For drilling various materials, including in a single operation:
Bricks, porous concrete, lightweight materials, plastics.
Tiles, ceramics, marble, glass.
Metal and material combinations in a single operation, such as when fitting windows or when reinforcing concrete.
Content:
1 each drill Size. (⌀) 4; 5; 6; 6; 8; 8; 10
Note:
Caution: only for rotary use (without hammer action!)
Faster drilling and more holes per battery charge than with hammer drill bits.

Countersink sets, in a case
Practical set for assembly and workshop use.
Content table use:
1× each countersink: Size 4,3; 5; 6; 6,3; 7; 8; 8,3; 10; 10,4; 11,5, 12,4; 15; 16,5; 19; 20,5; 23; 25
Number of countersinks: 17
Countersink tip angle: 90 degrees
Tool material: HSS
Number of cutting edges Z: 3

Square drive: 3/8 in
Total length: 305mm

Square drive: 3/8 in
Total length: 200mm

Strong head, laid-on joint. Jaws chemically blacked, polished head, plastic coated handles. Cutting edges induction hardened (approx. 61 HRC).
Standard: DIN ISO 5748
Material: Special tool steel, drop-forged, and oil-hardened.
overall length: 160 mm
Cutting capacity soft wire up to ⌀4 mm
Cutting capacity hard wire up to ⌀2.5 mm

Strong, very long, and slim blades; fully nickel-plated. Made of stainless steel.
Paper, fabric, thin material, and much more.
overall length: 200 mm

- vacuum unit for the manufacturing of thin-walled cast resin laminates and thermoplastic deep-drawing works

Features:
- 2 separate, electronically infinitely adjustable vacuum units with pressure gauge
- 4 connections for resin lamination
- 2 connections for deep drawing
- 2 connections for external units
- hose connection, inside Ø 6 mm
- 1,5 m power cord with grounded plug

Technical Data:
- dimensions W x D x H: 425 x 385 x 220 mm
- suction capacity: 25 l/min, approx. 80 % vacuum
- Power requirements: 220 – 230 V / 50 Hz / 1 Ph / 0.14 kW
- Special voltages upon request.
- Weight: 18 kg

Total length: 205mm
For conductor cross section: 0.5 mm² - 6 mm²

Execution:
Steel body with reduction system. Exact achievement of the defined crimping forces thanks to the integrated automatic clamping.
Economic model. Lateral introduction of the tips.

With hardened jaws and steel handles. Possibility of removing a handle to allow use in confined spaces.
For normal use: cast zinc body.

The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
The quality file for workshop use with long tool life and high removal rate.
Standard: DIN 7261 form D
Length without tang: 250 mm
Width: 10 mm

high-quality HSS drill bits for woodworking, have a special geometry and transport even wet wood chips perfectly out of deep holes, ideal for precise and clean holes in European and exotic hardwoods, coated and uncoated chipboard

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M3
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

Closed, pre-stretched line. ≥ M3 with GUN entry on both sides for easy threading and clean chip evacuation in the cutting direction. Entry on 2 nets. Ground and nitrided, rake angle approx. 15 °.
Thread size: M12
Thread Type: M
Side angle: 60 °
Tool type: HSS E
Tolerance class: DIN 13 6g
Cutting direction: straight
Pitch: 1.5mm
⌀ outer: 30mm
Height: 11mm

High quality malleable cast iron clamping arms; strong prismatic steel slide beam, knurled, electro-galvanised. Low friction steel spindle, burnished with trapezoidal thread and movable jaw. Instant (high speed) adjustment, reliable clamping. Up to size 400 with plastic protective cover on the clamping jaw, from size 500 onwards without protective cover.
Standard: DIN 5117
Cross section of the slide rail: 35×11 mm
Throat: 120 mm
Jaw capacity: 800 mm

Made entirely of forged steel − guaranteed unbreakable.
Opens forward. With forged pipe jaws underneath the normal jaws

This swivel chair with wheels is versatile: it can be used as a stool for massages, as an office chair or as a mobile seat in the workshop. The pleasantly padded seat and the comfortable backrest provide great comfort even when sitting for a long time. The seat height can be adapted to individual needs. Adopt this practical chair for your workstation!

Task chair with wheels
Mobile chair for doctor's office, hairdresser, office, studio, etc.
Height adjustable by gas spring
Pleasant seat thanks to comfortable upholstery
With comfortable backrest
Hard-wearing, easy-care seat cover
Optimal stability thanks to the 5-part base
Technical data :

Cover material: PVC leatherette
Colour: black (as illustrated)
Diameter: about 40 cm
Padding height: 8 cm
Seat height: 44 - 59 cm

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated

Multi-material handle with optimized grip area in terms of torque and comfort. Chrome-vanadium steel blade, chrome-plated