⌀45 / L=165mm

74-00869

TINA knives for the highest demands.

Finest handmade special knives "made in Germany" for leather and book restoration.

In a special hardening process, a unique quality is achieved that has been appreciated by users for decades.
ETOOCUTTKNLW

Delivered with: 5 chisels, 1 spare spring
Air requirement average, approx: 240 l/min
Working pressure: 6.3 bar
Chuck: 10 mm
Stroke count: 2200 min¯¹
Impact strength: 9.5 J
74-00803

L 300mm

also referenced under: EMACWELDWMHA, CRM 23, 74-01554

Made of tough rubber (90 Shore), non-rebound; with powerful impact. Worn faces can be reworked by turning on a lathe. With ash wood handle.
Head length: 90 mm
Head ⌀: 54 mm
Weight: 300 g
Handle length: 320 mm
74-00747

with nail puller and countersunk tip, painted black, with nail holder, with tubular steel handle and steel ring for better protection of the handle, with plastic handle

ETOOHAMMBALL
74-00691

ETOOHAMMB250

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.
74-01201

Sturdy metal central piece with handle of hickory, with nylon handle protection sleeve and ring wedge. The nylon inserts are impact resistant and wear-resistant, and are attached to the central piece by a double action system.
Central piece of steel.

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
ETOOHAMMRI500
74-00736

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
ETOOHAMMRI03

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.
ETOOHAMMRI02
74-00734

With hickory handle ergonomic shape, varnished.
Hammer head drop forged and ground to size. Carefully hardened and tempered. Head painted, face and peen bright finished.
With nylon handle protection sleeve. Size 200−1000 additionally with forged-on handle protection collar.

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 180 grit (medium) with long working life. Other side precision abrasive, 500 grit (very fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.

The grain, the binder, the abrasion-enhancing additives and the trimming disk reinforcement offer optimal abrasion performance and their service life depends on the different areas of use.
Disc to be deburred for steel and stainless steel with long service life and high abrasion capacity.
Maximum rotation speed: 80 m / s
⌀ bore: 22,23 mm
Max rotation speed: 6 600 min-1
Thickness of disc: 8 mm
⌀ disc: 230 mm

for 701P250=* Belt sander
Length: 2,175 mm
Grit: 40
Width: 320 mm
Weight 0.82 kg
To be used for: Processing wood and plastics

Ceramic bonded combination oilstones, hardness O/ P. One side coarse for roughing, the other side fine for finishing.
Special Aluminium Oxide 100 grit (coarse) with long working life. Other side precision abrasive, 280/320 grit (fine), very free cutting, high surface quality.
Application:
For deburring, finish smoothing of irregularities, rounding of edges.
74-00694

Very strong and flexible latex paper evenly spread with Silicon Carbide (SiC). Good grit bonding, high abrasion force and long service life.
Sheet size 230×280 mm.
Primarily for rubbing down by hand in bodywork building, repair workshops, and paint shops, for fine rubbing down of varnished or filled areas.
Grinding media: Silicon carbide
Grinding medium code: SiC
Grit: 150
Grit designation: medium
Manufacturer's designation: 911 C

74-00798

- Posterior walker favoring the alignment of the trunk and
legs
- 5 frame sizes and many accessories
- Very high stability and flexibility of use
- Outdoor model
- Extremely light aluminum frame

Used to ensure connection between ankle and foot
Length from joint
center=60mm

Used to ensure connection between ankle and foot
Length from joint
center=60mm

Tamarack Flexure Joint Caps are a uniquely designed external mounting option for installing Tamarack Flexure Joints on upper or lower limb orthotic devices.
74-01061

74-01239

74-01052

74-01240

beige color

Non-shaped colored PE foam for modular transtibial prostheses.

Suitable to use on below knee prostheses. Features a hole (diameter: 22mm) and can be used on both right and left side.

Flexible, non-shaped colored foam for modular transtibial prostheses.

Suitable to use on above knee prostheses. Features a hole (diameter: 22mm)

Flexible colored foam, preshaped for modular transfemoral protheses. Should only be used with modular knee joints with internal ewtension assists.
Knee flexion: 15°

110°

also referenced under: 5R9

also referenced under: ODROSTOC5R16, 5R1=6